Oscar_the_Grouch Posted May 16, 2007 Report Share Posted May 16, 2007 Bought this with the intention of using it on a TBI car, BUT need to upgrade the MPI first. So I need the model with the in and out portson opposite sides. This one with in and out on same side is to be usedon TBI set-ups were you will keep the OEM tubing route. So this needs to go to fund a new. This IC I purchased for $220 + $40 Sh (Total of $260.00) Selling for $180.00 SHIPPED Still NEW, Never runed on. See pics of ACTUAL cooler the ones with NO measurements at the bottom of the post. core length : 25"core height : 6.5"core thickness : 3.5"inlet/outlet size : 3"end to end length: 26.5" Total height: 12.5" Pressure drop of .05kg/cm2 at 1.2kg/cm2 of boost.Will flow over 1000CFM's without breaking a sweat. At MAX efficiency (Aproc 1300CFM's the presure drop is less than 1.5PSI) You do the math at 600-700CFM's. These are more efficient that the side to side flow intercoolers as the air never makes it to the TOP portion of the IC, so you are ONLY using the bottom 6-8" of the core for cooling. With this type IC your flow is TOP to BOTTOM so NO space is wasted thus making it more efficient in LESS space. Pics from Manufacturer.http://images.andale.com/f2/104/107/24391401/1147727256301_spec_a.JPG http://images.andale.com/f2/104/107/24391401/photoalbum/1147264852182_spec_a__1_.JPG Manufacture's/Seller's E-bay Auction:http://cgi.ebay.com/ebaymotors/FMIC-GODSPE...1QQcmdZViewItem ACTUAL IC Pics:Side A:http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/DSC00765.jpg Side B:http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/DSC00764.jpg FYI...THIS is the model I need in case you were wondering. Same manufacturer,BUT about $300+sh so its NOT cheap !http://i161.photobucket.com/albums/t229/Oscar-the-Grouch/opp252.jpg Post or e-mail if you are interested.Oscar( oscar-the-grouch@sbcglobal.net ) Quote Link to comment Share on other sites More sharing options...
83stariontravis Posted May 16, 2007 Report Share Posted May 16, 2007 This could be a stupid question. But if the core is the same size why not have a rad shop turn the top tank around. Shouldn't cost much. Late,Travis Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted May 16, 2007 Author Report Share Posted May 16, 2007 Travis Not Stupid at all... I thought of that and tried it....The local shops some WOULD NOT do it and others will overprice it as to NOT to do it. The cheapest quote I got was $175.00 ! If I was on a bigger city the price will be a bit more competetive but here you are pretty much stuck with what we have. "Take it or leave it" Small city attitude ! Besides aluminum welding I not everyone's forte and some of the radiator shops I visited they streight out told me they only do spot welding for aluminum nothing end tank related. Oscar Quote Link to comment Share on other sites More sharing options...
83stariontravis Posted May 16, 2007 Report Share Posted May 16, 2007 ah, I see. I have been talking about putting bigger in/out ports on the stock intercooler for a little better flowing setup and everyone said I should do the fab work and a rad shop would weld it up for me cheap. But obviously that probably isn't the case. lol. Good luck with the sale and hope you get what your looking for. Quote Link to comment Share on other sites More sharing options...
MontyTSI Posted May 16, 2007 Report Share Posted May 16, 2007 thats a great intercooler and a great price i always worried about fitament but that one looks like the endtanks are not as "tall" as some which for our low mounting should work great. sorry to hijack if i wasnt going MPI id be on this. Quote Link to comment Share on other sites More sharing options...
S5RX7 Posted May 16, 2007 Report Share Posted May 16, 2007 My brother has this intercooler on his 89T 300zx it works good i never new any specs on it but if them are true then its a nice intercooler. Hes running 3" IC piping gonna go down to 2.5 no need for 3" it crams the bay. Quote Link to comment Share on other sites More sharing options...
Mazarin Posted May 17, 2007 Report Share Posted May 17, 2007 Must stop spending money, must stop spending money... Quote Link to comment Share on other sites More sharing options...
Oscar_the_Grouch Posted May 17, 2007 Author Report Share Posted May 17, 2007 SOLD LocallyThanks allOscar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.