101PROPOSE Posted May 22, 2007 Author Report Share Posted May 22, 2007 How much torque would be required to adjust the damping screw? The more I look at your setup the more I think we could improve this thing. Even thought you have already done an excellent job to it. Maybe in the next phase two models we could make it a DC 12volt motorized forward and reverse module to adjust the dampening screw then dial in the setting from inside the car. Anyway! Just a little engineering over thinking here. Anyone else have any ideas for this adjustment out there? Jetspd150, that thumb screw idea is great! not much torque is needed to turn the adjuster screws. i ordered some knobs already. i will try out and post some pictures. thanks,101 Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted May 22, 2007 Author Report Share Posted May 22, 2007 5-21-07 members insterested in ordering the kit 1. WickedTSI2. sittin-sideways ---- 10k front 9k rear3. Casey_L ------------ 8k front 6k rear4. screemin eagle5. needsq6. Rusky7. ls1rx78. 308mc Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted May 22, 2007 Author Report Share Posted May 22, 2007 i am expecting first two sets to be here within a week or two. i will post pictures of a complete set as soon as i finish and ready to ship. thanks,101 Quote Link to comment Share on other sites More sharing options...
Casey_L Posted May 22, 2007 Report Share Posted May 22, 2007 101, is there a possibility of ordering other springs and spring rates at a later date. What about a progressive, or a rally type spring. They look like this. The have a stock type "progressive" winding in the springs. http://www.ksportusa.com/images/rallyspec.jpg Quote Link to comment Share on other sites More sharing options...
Jetspd150 Posted May 22, 2007 Report Share Posted May 22, 2007 Glad to be of some help. I'm really glad that you are taking the time to build these products for our group it is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted May 23, 2007 Author Report Share Posted May 23, 2007 101, is there a possibility of ordering other springs and spring rates at a later date. What about a progressive, or a rally type spring. They look like this. The have a stock type "progressive" winding in the springs. http://www.ksportusa.com/images/rallyspec.jpg different rate springs will be available for you later as for the progressive springs, i will check with the factory and let you know thanks,101 Quote Link to comment Share on other sites More sharing options...
308mc Posted May 29, 2007 Report Share Posted May 29, 2007 Count me in on this GP. I will have the cash on the 5th of july. Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted May 30, 2007 Author Report Share Posted May 30, 2007 hello members, i received thumb wheels/knobs today and tried it on the prototype. it worked fine. i was able to put my finger through the hole and easily push the wing/turn the knob. it takes about 60 degree turn for each click. check out the pictures below and let me know. thanks, 101 http://www.mookeeh.com/starquest/knob-4.jpg http://www.mookeeh.com/starquest/knob-2.jpg http://www.mookeeh.com/starquest/knob-3.jpg http://www.mookeeh.com/starquest/knob-5.jpg http://www.mookeeh.com/starquest/knob-1.jpg Quote Link to comment Share on other sites More sharing options...
importwarrior Posted May 30, 2007 Report Share Posted May 30, 2007 can you get it on and off through that little hole? once it is on the car it will be a lot more difficult. Quote Link to comment Share on other sites More sharing options...
screemin eagle Posted May 30, 2007 Report Share Posted May 30, 2007 my you have a sexy finger tip. everything is lookinggood man! cant wait till they are ready to rock Quote Link to comment Share on other sites More sharing options...
jawatech Posted May 30, 2007 Report Share Posted May 30, 2007 Kick a** man! I can't wait until these are ready! Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted May 31, 2007 Author Report Share Posted May 31, 2007 can you get it on and off through that little hole? once it is on the car it will be a lot more difficult. importwarrior, no, i cannot get it on and off through that little hole. that hole is just big enough for a finger to go through. 101 Quote Link to comment Share on other sites More sharing options...
sittin-sideways Posted June 5, 2007 Report Share Posted June 5, 2007 i just want to know will my set of 10kg 9kg with come with camber in front and rearcuz that what i wanted, just asking ???? :?: Quote Link to comment Share on other sites More sharing options...
sittin-sideways Posted June 5, 2007 Report Share Posted June 5, 2007 any update yet? Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted June 6, 2007 Author Report Share Posted June 6, 2007 any update yet? sorry for the delay. i talked to factory yesterday and they told me that it is taking a little longer because they did not have the struts i needed in stock and had to make new ones. i should be getting them soon. 101 Quote Link to comment Share on other sites More sharing options...
Casey_L Posted June 6, 2007 Report Share Posted June 6, 2007 Will there be a deposit prior to buying them or will it be in one lump sum? Also, how long are you going to test these before they go out? Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted June 8, 2007 Author Report Share Posted June 8, 2007 Will there be a deposit prior to buying them or will it be in one lump sum? Also, how long are you going to test these before they go out? i am thinking about receiving a full payment before i ship out the kit. i have no problem taking deposits and payments but after i get the actual kits ready to ship out. thanks,101 Quote Link to comment Share on other sites More sharing options...
MainstreaM Posted June 8, 2007 Report Share Posted June 8, 2007 Would just the strut cartridges and springs be available? This setup would go well on my Celica since it has the same design on the front struts. Kane Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted June 12, 2007 Author Report Share Posted June 12, 2007 Would just the strut cartridges and springs be available? This setup would go well on my Celica since it has the same design on the front struts. Kane so you need everything but no brakets and the camber plates? Quote Link to comment Share on other sites More sharing options...
KEVIN_TECHEE Posted July 1, 2007 Report Share Posted July 1, 2007 HEY WHATS UP WITH THESE? UPDATE PLEASE. Quote Link to comment Share on other sites More sharing options...
sittin-sideways Posted July 1, 2007 Report Share Posted July 1, 2007 ya it driving me crazy lol Quote Link to comment Share on other sites More sharing options...
DrvNsily Posted July 3, 2007 Report Share Posted July 3, 2007 I'm interested also. so these are single adjustable? And is there a price yet? Quote Link to comment Share on other sites More sharing options...
101PROPOSE Posted July 3, 2007 Author Report Share Posted July 3, 2007 hello members, sorry for the delay. i just talked to the manufacture. they informed me that my shipment will be ready in two weeks. i will let you know once i get them in. thanks,101 Quote Link to comment Share on other sites More sharing options...
Casey_L Posted July 3, 2007 Report Share Posted July 3, 2007 yay! :shock: Quote Link to comment Share on other sites More sharing options...
desert_starion Posted July 4, 2007 Report Share Posted July 4, 2007 Oh I will definitley be up for a set, but money is tight, I just dumped 1500 into the car to finish her up... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.