Funky Phil Posted October 7, 2015 Report Share Posted October 7, 2015 (edited) Depending on if the company you chose had a similar "master lobe". Otherwise its $$$$ to have one made. But yes, thats how you map a lobe. Wide LSA's will make a motor lazy. Edited October 7, 2015 by Funky Phil Link to comment Share on other sites More sharing options...
Fuze Posted October 7, 2015 Report Share Posted October 7, 2015 This is great research. I used the rollers years ago and never figured out why they ran the car so badly, I just gave up and put the slip rockers back in and was back in business. I admit not having the patience at the time to deal with all of this! Link to comment Share on other sites More sharing options...
stariondreams Posted October 8, 2015 Report Share Posted October 8, 2015 A good friend sent me to these guys said they can make from scratch going to call today hope i got my facts right hate to sound like a dumb tail on the phonehttp://www.elgincams.com/ Link to comment Share on other sites More sharing options...
kev Posted October 9, 2015 Author Report Share Posted October 9, 2015 There is some good technical info on that site! Let us know how the call goes, I'm really curious. kev Link to comment Share on other sites More sharing options...
questtuner82 Posted October 23, 2015 Report Share Posted October 23, 2015 Elgin cams doesnt grind or regrind cams for the g54. Crower cams will grind a cam to any specs you could want. Also the cam grinder that Tim C. Used for his grinds is Colt Cams located in canada. Spoke with the owner today and a very nice guy. Link to comment Share on other sites More sharing options...
Recommended Posts