Jump to content

86 black quest part out


freebird
 Share

Recommended Posts

How much for the plastic that goes around the steering colum?

 

do you want both pieces?

or just upper and lower.

I have more than one of these, the one in the pic, top part has a piece cracked off at the bolt location. wich youll never see if its mounted.

The bottom if very nice

Link to comment
Share on other sites

  • 1 month later...
  • 7 months later...
You said you had some chipped and broken wiper cowls. Do you have any drivers sides left, in any condition. I just need the small section where it meets in the center so I can "build a complete one. Look forward to hearing from you
Link to comment
Share on other sites

do you have pics? also could a bumpercover be hung from the front?

 

yes.....but you need the foam to keep it in place.

 

I found a few picks....and looking at them i do remember what i used

At first I welded bolts to a 1/4'' bar stock and located mounting positions for bumper cover.....bar stock was actually a chain link fence bar for tightening the ends of the fence.

http://i778.photobucket.com/albums/yy68/jaybirdskate/a1_zpsi53hyls8.jpg

should be able to see it in there.

 

Then the main bar I used was a chrome 2'' tube for a chevy bed.

the rest was just some 1'' angle

I did it all on the cheap.....but it still lives and functions on the car very well!!!

http://i778.photobucket.com/albums/yy68/jaybirdskate/a2_zpszfdjihhr.jpg

http://i778.photobucket.com/albums/yy68/jaybirdskate/a3_zpsxfu4aeh9.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...