SFBMX88 Posted October 30, 2013 Report Share Posted October 30, 2013 (edited) ***All prices, unless otherwise noted, include PayPal fees and ground shipping to the lower 48 states ONLY. PayPal ONLY.*** Parts added often, check back for updates! *Read through this list of parts or press control+F to open a word search! Pics below price list. ------------------------------------------------------------------------------------------------------------------------------------------------------------- 10/15/14 additions - Click here for pictures at post #29 $30 PAIR - used/no bulbs or harness included/no oil lines or fittings either/no mounting bracket with oil gauge - Equus MECHANICAL water temp and oil pressure gauges - Oil gauge uses 1/8" NPT fitting - gauges are LARGE, 2" diameter. $30 - used/tested Throttle Position Sensor(TPS) - wire insulation breaking/cracking at junction to sensor - still works, but would be a good idea to seal this up ------------------------------------------------------------------------------------------------------------------------------------------------------------- 5/8/2014 additions - Click here for pictures at post #23 SOLD $45 - used but excellent condition* A/C delete duct(MB123891 - discontinued) with firewall plug for those looking to completely remove their air conditioning. Takes the place of the evaporator under the dash, behind glove box. ***1 available ------------------------------------------------------------------------------------------------------------------------------------------------------------- 3/9/2014 additions - Click here for pictures at post #22 $90 - 5 speed shifter modified by Mr. Andaya himself with his rebuild parts - fulcrum bushing(takes the slop out of the stock shifter)/removable shifter shaft(http://www.starquest...showtopic=93050). Includes 1 MD703619 small bellows/dust cover for shift lever and 1 MD701723 small shifter gasket(3 hole). Shifter was never used/installed after the modification was done. SOLD $5 - MD701723 small shifter gasket(3 hole) ****$5 for the 2 availableSOLD $30 - stock 5 speed shift lever assembly - threads were cut off, was going to be rebuilt with Mr. Andaya parts, but never got around to it...SOLD $5 - MD703619 small bellows/dust cover for shift leverSOLD $40 - ARP head studs ****USED, UNKNOWN MILES, PULLED OFF A PARTS CAR - threads on top of one stud are slightly damaged, but still looks functional, could be cleaned up - 10 studs, 10 nuts, 10 washers included ------------------------------------------------------------------------------------------------------------------------------------------------------------- 12/31/2013 - additions - Click here for pictures at post #16 $50 - 12A intercooled compressor housing - in good shape, housing only $20 - 12a single port wastegate actuator only $40 - 1st gen dsm bypass valve - unmodified/uncrushed, no mating flange or gasket included SOLD $60 - steering gearbox pulled from an 87 widebody parts car, includes pitman arm - didnt seem to leak the fews times I ran the car to move it, no guarantees! SOLD $40 - inner left(ES2197R) AND inner right(ES2428R/MB166981) tie rod ends - brand new in box MOOG units(made in Japan) - removed from plastic to be greased - *missing one nut - MUST BUY BOTH ------------------------------------------------------------------------------------------------------------------------------------------------------------- 11/21/2013 additions - Click here for pictures at post #13 $30(set) - MD614110 injector seals only set + intake manifold gasket + throttle body base gasket + thermostat gasket $8(set) - jet valve seals(12) + valve seals(8) + fuel pump block off plate gaskets(5) + timing cover gasket pair(2 pairs) + some random assorted gaskets that came with the original kit that may or may not fit the Starion(saw a carburetor and random water pump gaskets in there) $20 - 201-1158 fan temp switch(beck arnley) - can anybody verify if this is the high or low temp fan switch??? SOLD $18 - MD972903 thermostat with housing gasket(1 available)SOLD $17 - MD008839 flywheel bolts(6)SOLD $10(set) - MF520015 o-ring sandwich plate to block small + MF520588 o-ring sandwich plate to block bigSOLD $25 - MB504732 fuel filterSOLD $20 - mookeeh/101propose silicone pcv valve hose(black) v/c to intake manifoldSOLD $7 - 2504A012 manual transmission output shaft/tail housing sealSOLD cam bore plug(back of head) + crescent plug(front of head) SOLD $20(set) - MF450405 intake manifold washers(M8)(10) + MS401428 intake manifold studs(M8)(10) + MF430005 intake manifold nuts(M8)(10)SOLD $40(set) - MD041192 exhaust manifold washers(8) + MD031537 exhaust manifold studs(8) + MD092806 exhaust manifold nuts(8) + exhaust manifold gasket + turbo to manifold gasket + turbo to down pipe gasketSOLD $30(set) - MD611845 distributor inner shaft seal(4) + MD619987 distributor housing o-ring(4) - price is for all 8 seals ------------------------------------------------------------------------------------------------------------------------------------------------------------- 11/13/2013 additions - Click here for pictures at post #10: RECYCLED $60 - stock intake manifold from an 88 - includes thermostat housing/used themostat/throttle plate housing/fuel rail but no mixer housing(see pics below what you see is what you get ***NO VACUUM SWITCHING THERMO VALVE INCLUDED-removed and sold) SOLD $200 - log style, stress relieved exhaust manifold with about 9mm thick T3 flange and external wastegate - used, no cracks or leaks, wastegate is ebay unit(HKS standard 40mm knock off) with a 10 psi HKS spring installed with custom dump tube - manifold needs some studs installed for the turbo flange - this will be sold as a complete set(manifold/wastegate/dump tube) only, no gaskets included ------------------------------------------------------------------------------------------------------------------------------------------------------------- 11/11/2013 additions - Click here for pictures at post #9 $45 - 1986 alternator - NO PULLEY INCLUDED $30 - K&N e-2873 replacement air filter - deformed from being in storage, but should still work well after cleaning/oiling $55 - ported stock exhaust manifold - CRACKED at one runner, was welded by previous owner, but cracked again - see pics SOLD $70 - 2.5" downpipe to match stock style Mitsubishi turbine housings - bought off another member years ago, but no longer needed -------------------------------------------------------------------------------------------------------------------------------------------------------------- SOLD Perma-cool oil filter adapter(mounts where oil filter screws on, one piece to help relocate you oil filter) $20 - 88/89 maf(honeycomb not in the greatest shape!) SOLD 3 1st gen MAF PLUGS(use these to adapt your 88/89 maf plug to the 1st gen maf connector) $20 - 86 knock box SOLD $35 - GM 3 bar map(was used in a MegaSquirt setup)SOLD $60 - 88/89 ecuSOLD $35 - 88/89 knock box(upper mounting tabs were bent flat to mount in my flatty, could be bent back)SOLD $20 - 86 boost sensor(mounted on firewall near brake booster)SOLD $5/each - 2 stock injector resistor packsSOLD $35 - ignition tumbler, hatch lock, and key(no door/glove box lock/fuel door/tumbler clamp) http://i.imgur.com/BKdIJL8.jpghttp://i.imgur.com/XddUXVV.jpghttp://i.imgur.com/g0Vx67d.jpghttp://i.imgur.com/5BS0Z.jpg Edited July 8, 2015 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
boston Posted November 2, 2013 Report Share Posted November 2, 2013 do u still have available knock box Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 4, 2013 Author Report Share Posted November 4, 2013 do u still have available knock box Which one? Ive got one for an 86, and one for 88/89. Quote Link to comment Share on other sites More sharing options...
boston Posted November 4, 2013 Report Share Posted November 4, 2013 (edited) 88/89 Thank Edited November 4, 2013 by boston Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 4, 2013 Author Report Share Posted November 4, 2013 88/89Thank You have been PM'd Quote Link to comment Share on other sites More sharing options...
Malykaii Posted November 6, 2013 Report Share Posted November 6, 2013 Both injector resistors are good? I'll take both if they'll fit an 88. PMed. Quote Link to comment Share on other sites More sharing options...
Amonje123 Posted November 7, 2013 Report Share Posted November 7, 2013 Ill take the 86 boost sensor pm you Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 7, 2013 Author Report Share Posted November 7, 2013 Both injector resistors are good? I'll take both if they'll fit an 88. PMed.Ill take the 86 boost sensorpm you You guys got PMs! Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 12, 2013 Author Report Share Posted November 12, 2013 (edited) 11/11/2013 additions - Click here for full parts list on first post: $45 - 1986 alternator - NO PULLEY INCLUDED $30 - K&N e-2873 replacement air filter - deformed from being in storage, but should still work well after cleaning/oiling $55 - ported stock exhaust manifold - CRACKED at one runner, was welded by previous owner, but cracked again - see pics in first post SOLD $70 - 2.5" downpipe to match stock style Mitsubishi turbine housings - bought off another member years ago, but no longer needed http://i.imgur.com/LusK3oG.jpghttp://i.imgur.com/pOlah5i.jpghttp://i.imgur.com/U7a8yIU.jpg http://i.imgur.com/wr848mY.jpghttp://i.imgur.com/gBTUS3e.jpghttp://i.imgur.com/JEaJFsY.jpg Edited May 9, 2014 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 13, 2013 Author Report Share Posted November 13, 2013 (edited) 11/13/2013 additions - Click here for full parts list on first post: RECYCLED $60 - stock intake manifold from an 88 - includes thermostat housing/used themostat/throttle plate housing/fuel rail but no mixer housing(see pics below what you see is what you get ***NO VACUUM SWITCHING THERMO VALVE INCLUDED-removed and sold) SOLD $200 - log style, stress relieved exhaust manifold with about 9mm thick T3 flange and external wastegate - used, no cracks or leaks, wastegate is ebay unit(HKS standard 40mm knock off) with a 10 psi HKS spring installed with custom dump tube - manifold needs some studs installed for the turbo flange - this will be sold as a complete set(manifold/wastegate/dump tube) only, no gaskets included Edited October 17, 2014 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
Amonje123 Posted November 14, 2013 Report Share Posted November 14, 2013 I want the header pm you Quote Link to comment Share on other sites More sharing options...
taeisallin Posted November 14, 2013 Report Share Posted November 14, 2013 I'll take the 3 bar map sensor. Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 21, 2013 Author Report Share Posted November 21, 2013 (edited) 11/21/2013 additions - Click here for full parts list on first post $30(set) - MD614110 injector seals only set + intake manifold gasket + throttle body base gasket + thermostat gasket $8(set) - jet valve seals(12) + valve seals(8) + fuel pump block off plate gaskets(5) + timing cover gasket pair(2 pairs) + some random assorted gaskets that came with the original kit that may or may not fit the Starion(saw a carburetor and random water pump gaskets in there) $20 - 201-1158 fan temp switch(beck arnley) - can anybody verify if this is the high or low temp fan switch??? SOLD $18 - MD972903 thermostat with housing gasket(1 available)SOLD $17 - MD008839 flywheel bolts(6)SOLD $10(set) - MF520015 o-ring sandwich plate to block small + MF520588 o-ring sandwich plate to block bigSOLD $25 - MB504732 fuel filterSOLD cam bore plug(back of head) + crescent plug(front of head) SOLD $7 - 2504A012 manual transmission output shaft/tail housing sealSOLD $30(set) - MD611845 distributor inner shaft seal(4) + MD619987 distributor housing o-ring(4) - price is for all 8 sealsSOLD $40(set) - MD041192 exhaust manifold washers(8) + MD031537 exhaust manifold studs(8) + MD092806 exhaust manifold nuts(8) + exhaust manifold gasket + turbo to manifold gasket + turbo to down pipe gasketSOLD $20 - mookeeh/101propose silicone pcv valve hose(black) v/c to intake manifoldSOLD $20(set) - MF450405 intake manifold washers(M8)(10) + MS401428 intake manifold studs(M8)(10) + MF430005 intake manifold nuts(M8)(10) http://i.imgur.com/hWBRLTq.jpghttp://i.imgur.com/OJVZtH4.jpghttp://i.imgur.com/6Nt3WB3.jpg?1http://i.imgur.com/xIQZu1k.jpg?1http://i.imgur.com/niPYIu8.jpghttp://i.imgur.com/5EbOFQR.jpg Edited May 11, 2014 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
SOTTY Posted November 21, 2013 Report Share Posted November 21, 2013 I'll take the fuel filter assembly , thanks ! Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted November 22, 2013 Author Report Share Posted November 22, 2013 I'll take the fuel filter assembly , thanks ! PM sent! Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted January 1, 2014 Author Report Share Posted January 1, 2014 (edited) 12/31/2013 - additions - CLICK HERE FOR FULL PARTS LIST ON FIRST POST $50 - 12A intercooled compressor housing - in good shape, housing only $20 - 12a single port wastegate actuator only $40 - 1st gen dsm bypass valve - unmodified/uncrushed, no mating flange or gasket included SOLD $60 - steering gearbox pulled from an 87 widebody parts car, includes pitman arm - didnt seem to leak the fews times I ran the car to move it, no guarantees! SOLD $40 - inner left(ES2197R) AND inner right(ES2428R/MB166981) tie rod ends - brand new in box MOOG units(made in Japan) - removed from plastic to be greased - *missing one nut - MUST BUY BOTH http://i.imgur.com/cvIapnj.jpghttp://i.imgur.com/gD9an8c.jpghttp://i.imgur.com/k4q6n66.jpghttp://i.imgur.com/L91bX1u.jpg Edited July 8, 2015 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted January 1, 2014 Report Share Posted January 1, 2014 ill take pcv hose Quote Link to comment Share on other sites More sharing options...
Dred_85.5_TSI Posted February 4, 2014 Report Share Posted February 4, 2014 $30(set) - MD611845 distributor inner shaft seal(4) + MD619987 distributor housing o-ring(4) - price is for all 8 seals I'll take this. Paypal ready. I PM'ed you. Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted February 4, 2014 Author Report Share Posted February 4, 2014 $30(set) - MD611845 distributor inner shaft seal(4) + MD619987 distributor housing o-ring(4) - price is for all 8 seals I'll take this. Paypal ready. I PM'ed you. PM sent Quote Link to comment Share on other sites More sharing options...
cobralucci Posted February 5, 2014 Report Share Posted February 5, 2014 Pmed Quote Link to comment Share on other sites More sharing options...
bender 702 Posted February 11, 2014 Report Share Posted February 11, 2014 (edited) Will Take the ECU if it is for an Automatic... Pay Pal ready too. Edited February 11, 2014 by bender 702 Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted March 9, 2014 Author Report Share Posted March 9, 2014 (edited) 3/9/2014 additions - Click here for full parts list on first post $90 - 5 speed shifter modified by Mr. Andaya himself with his rebuild parts - fulcrum bushing(takes the slop out of the stock shifter)/removable shifter shaft(http://www.starquest...showtopic=93050). Includes 1 MD703619 small bellows/dust cover for shift lever and 1 MD701723 small shifter gasket(3 hole). Shifter was never used/installed after the modification was done. SOLD $5 - MD701723 small shifter gasket(3 hole) ****$5 for the 2 availableSOLD $5 - MD703619 small bellows/dust cover for shift leverSOLD $30 - stock 5 speed shift lever assembly - threads were cut off, was going to be rebuilt with Mr. Andaya parts, but never got around to it...SOLD $40 - ARP head studs ****USED, UNKNOWN MILES, PULLED OFF A PARTS CAR - threads on top of one stud are slightly damaged, but still looks functional, could be cleaned up - 10 studs, 10 nuts, 10 washers included http://i.imgur.com/SC2XNkh.jpghttp://i.imgur.com/PfENI1k.jpghttp://i.imgur.com/7qrPTD4.jpghttp://i.imgur.com/aRJRptV.jpg Edited May 11, 2014 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
SFBMX88 Posted May 9, 2014 Author Report Share Posted May 9, 2014 (edited) 5/8/2014 additions - Click here for full parts list on first post SOLD $45 - used but excellent condition* A/C delete duct(MB123891 - discontinued) with firewall plug for those looking to completely remove their air conditioning. Takes the place of the evaporator under the dash, behind glove box. ***1 available Edited November 14, 2014 by SFBMX88 Quote Link to comment Share on other sites More sharing options...
randy Posted May 9, 2014 Report Share Posted May 9, 2014 (edited) I'll take these if still available (1) MD972903-thermostat+gasket (2) MD70123 -small 3 hole shifter gasket x2.What other gaskets are available? I also want the flywheel bolts MD00839,also do you have another exhaust manifold gasket? Edited May 9, 2014 by randy Quote Link to comment Share on other sites More sharing options...
randy Posted May 10, 2014 Report Share Posted May 10, 2014 Pm'd you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.