idfaskpure Posted February 23, 2013 Report Share Posted February 23, 2013 I'm not that new but it's one of my first topics. Can Anyone point me in the right direction for a/c delete and also abs delete? I tried searching with no luck Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted February 23, 2013 Report Share Posted February 23, 2013 To delete the a/c you will need the delete duct from a mighty max pickup. It replaces your a/c evaporator unit. I have a wirite up on how to do it if you need it. To delete the ABS you'll need to either find or make a bypass line that goes from your proportion valve to the master cylinder. A few people have made steel braided units but I'm not sure if they're made anymore. 1 Quote Link to comment Share on other sites More sharing options...
idfaskpure Posted February 23, 2013 Author Report Share Posted February 23, 2013 Could i have the write up? And thanks for posting Quote Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted February 23, 2013 Report Share Posted February 23, 2013 http://www.starquestclub.com/forum/index.php?showtopic=134659andhttp://koquest.homestead.com/ABSRemoval.htmltheres more on the ac delete but you gotta look yourself and doing it isnt hard i did it in one day in my driveway but if you have qustions just pm me Quote Link to comment Share on other sites More sharing options...
idfaskpure Posted February 23, 2013 Author Report Share Posted February 23, 2013 Alright thanks everyone Quote Link to comment Share on other sites More sharing options...
obsolete Posted February 23, 2013 Report Share Posted February 23, 2013 (edited) Here's what I used for an ABS delete: One of these: http://www.summitrac...aer-fbpa0039-22Two of these: http://www.summitrac...arts/fra-650307 Turns out 22" is more than enough; I think 19" would have worked fine, maybe even shorter. There are a lot of those pre-made 3AN brake hoses to choose from. Also, a 90-degree fitting on both ends might be handy. Oh, and y'know, don't ever drive on a public road with one of those braided hoses on your car, since they're not DOT approved... Edited February 23, 2013 by obsolete Quote Link to comment Share on other sites More sharing options...
aknorthstar Posted February 23, 2013 Report Share Posted February 23, 2013 (edited) For the abs delete I used a 3/16 x 30 metric thread , japanese flare, steel line I got at Oreillys for 8$ has fittings on both ends you just need a line bender. I used a coat hanger to mock up a sample , then bent the brake line to match. Edited February 23, 2013 by aknorthstar Quote Link to comment Share on other sites More sharing options...
idfaskpure Posted February 24, 2013 Author Report Share Posted February 24, 2013 wow thanks for the replys everyone Quote Link to comment Share on other sites More sharing options...
DMNDSTAR87 Posted February 24, 2013 Report Share Posted February 24, 2013 http://i1125.photobucket.com/albums/l587/dmndstar87/2013-01-17_19-08-57_848.jpg?t=1358526281http://i1125.photobucket.com/albums/l587/dmndstar87/2013-01-17_19-16-10_574.jpg?t=1358526248gig out Quote Link to comment Share on other sites More sharing options...
BuGG Posted February 24, 2013 Report Share Posted February 24, 2013 (edited) Wilwood http://www.summitrac...-6414/overview/http://www.wilwood.com/Images/BrakeLinesAnd_Fittings/BrakeLine_Photos-Large/220-6414_lg.jpg Edited February 24, 2013 by BuGG Quote Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted February 25, 2013 Report Share Posted February 25, 2013 besides the break line what do you do with the pulse generator when doing a abs delete Quote Link to comment Share on other sites More sharing options...
BuGG Posted February 25, 2013 Report Share Posted February 25, 2013 You can leave it connected. Swap out a non abs pulse generator. Quote Link to comment Share on other sites More sharing options...
obsolete Posted February 25, 2013 Report Share Posted February 25, 2013 Swap out a non abs pulse generator.What? The pulse generator is for the ABS. Just leave it. Quote Link to comment Share on other sites More sharing options...
BuGG Posted February 25, 2013 Report Share Posted February 25, 2013 (edited) He is deleting the ABS. He can acquire a pulse generator from a non-ABS starquest and put it in its place. Really its not called a pulse generator on the non-ABS cars but I dont know its proper name. In the pic of this post you can see what I am talking about. Here they are side by side. http://www.starquestclub.com/forum/index.php?showtopic=135594 Edited February 25, 2013 by BuGG Quote Link to comment Share on other sites More sharing options...
importwarrior Posted February 25, 2013 Report Share Posted February 25, 2013 what else you can do is get some steel brake line for an eclipse (Metric threads) at any auto store in 30 inches and just hand bend it to fit.only cost like 7 to 10 dollars. Quote Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted February 25, 2013 Report Share Posted February 25, 2013 He is deleting the ABS. He can acquire a pulse generator from a non-ABS starquest and put it in its place. Really its not called a pulse generator on the non-ABS cars but I dont know its proper name. In the pic of this post you can see what I am talking about. Here they are side by side. http://www.starquest...howtopic=135594what is the pulse generator even for/do Quote Link to comment Share on other sites More sharing options...
obsolete Posted February 25, 2013 Report Share Posted February 25, 2013 He is deleting the ABS. He can acquire a pulse generator from a non-ABS starquest and put it in its place. Really its not called a pulse generator on the non-ABS cars but I dont know its proper name. In the pic of this post you can see what I am talking about. Here they are side by side. http://www.starquest...howtopic=135594 Gotcha. Thanks for the info. That would be a really thorough ABS delete. My point was that it doesn't do any harm to leave it there. Quote Link to comment Share on other sites More sharing options...
BuGG Posted February 25, 2013 Report Share Posted February 25, 2013 Yeah I said that as well in post #12. Quote Link to comment Share on other sites More sharing options...
idfaskpure Posted February 25, 2013 Author Report Share Posted February 25, 2013 So go to the parts store and ask for 30" of brake line with eclipse fittings? Quote Link to comment Share on other sites More sharing options...
BeachQuest Posted February 25, 2013 Report Share Posted February 25, 2013 Ok gents stupid question. What is the benefit in the ABS delete? I am assuming that the A/C delete is for HP (Less friction) and weight? Quote Link to comment Share on other sites More sharing options...
idfaskpure Posted February 26, 2013 Author Report Share Posted February 26, 2013 What I heard is our ABS is only for the rear wheels and it is old and outdated. Also the abs module is huge and heave. It also cleans up the engine bay Quote Link to comment Share on other sites More sharing options...
prototype78 Posted February 26, 2013 Report Share Posted February 26, 2013 3 days ago I removed the a/c components inside the car http://s1018.photobucket.com/albums/af306/PROTOGENETIC2/?action=view¤t=20130219_160333.jpg And you will also need this plug http://s1018.photobucket.com/albums/af306/PROTOGENETIC2/?action=view¤t=KGrHqFg8E1fMgqV5zBNcVLdHUlg_1.jpg Quote Link to comment Share on other sites More sharing options...
importwarrior Posted February 26, 2013 Report Share Posted February 26, 2013 So go to the parts store and ask for 30" of brake line with eclipse fittings? yup thats what i basically did.just asked the guy for 30 inches of brake line for a 1995 mitsubishi eclipse.pick any year eclipse. that is just so they get the thread patern-end fitings correct. Quote Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted February 26, 2013 Report Share Posted February 26, 2013 yup thats what i basically did.just asked the guy for 30 inches of brake line for a 1995 mitsubishi eclipse.pick any year eclipse. that is just so they get the thread patern-end fitings correct.do you mean 30'' of hard line or flex line Quote Link to comment Share on other sites More sharing options...
jisleyjr Posted February 26, 2013 Report Share Posted February 26, 2013 For the abs delete I used a 3/16 x 30 metric thread , japanese flare, steel line I got at Oreillys for 8$ has fittings on both ends you just need a line bender. I used a coat hanger to mock up a sample , then bent the brake line to match.Thanks for the tip to check out Oreilly's, here is a search using thier site: http://www.oreillyauto.com/site/c/search.oap?keyword=metric+thread+japanese+flareI was at napa the other day and struck out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.