Chad Posted May 20, 2012 Report Share Posted May 20, 2012 Need to downsize parts stash. Will consider offers on all items if you don’t like my price, but no low-ballers please. $60 1@ 88 ECU in 88 box$60 1@ 88 ECU in 87 box$30ea 2@ 86 TSI ECU$10 ea 2@ 86 ES ECU$10 ea 3@ 86 MAP sensor on fire wall$10 ea 1@ 86 MAP sensor switch next to MAP$40 1@ 88 Ignitor, tested good with harness cut$20 1@ 86 Ignitor, tested good with harness cut$20=all 3@ 86 Ignitors, untested but all presumed good$40 1@ 1gen DSM MAS with good boot, tested good$25 1@ 86 MAS with good boot, tested good$10 1@ K&N Air filter for stock air box, 15,000 miles with recent clean/recharge with genuine K&N recharge oil. $35 1@ 88 ETACS, known good with harness cut $5 ea 2@ Stereo harness for repairing butchered stock harness$60 1@ 88 Stereo console and stereo bezel with pocket, great condition$60 1@ 86 Stereo console and stereo bezel with pocket, great condition$20 1@ 86 Stereo bezel, couple scratches but no cracks$30 1@ 125 K speedo/cluster$30 ea 2@ Black Gage hood with side switches in great shape, untested but presumed good 1 sold$15 1@ Black Gage hood with side switches, couple small scratches, untested but presumed good$10 1@ Black Gage hood switches only, untested but presumed good$45 1@ Black 88 Center arm rest console, very good shape, good latch pending pictures/buyers approval$30 1@ Black 86 Center arm rest console, broken lid latch and swollen lid, still not bad looking.$25 1@ Black 86 Style center console coin pocket and mirror switch$50 1@ Black 86 Seat belt kit to eliminate broken track belts, no trim$65 1@ Black 86 Seat belt kit to eliminate broken track belts, no trim With upper mount trim $80 1@ Steering box, no leaks or slop$45 1@ torque tube shaft and splined coupler (no tube/flange). Very slight play, didn't hear/feel in car, but it's there. better than most, but not perfect $300 1@ 88 Manual transmission conversion kit, contains: Clutch pedal assembly and custom made hanger bracket Narrow manual brake pedal, needs rubber cover Clutch hard and soft lines and slave and master cylinder Driveshaft with recent U-joints, very nice condition but some surface rust 240 MM stock flywheel, recently surfaced, couple hundred miles since surface 240 mm E-bay 3 stage clutch pressure plate, only couple hundred miles Damaged disc, get a new disc and you have a nice clutch. Lots of life left 88 Transmission, road tested, shifts nice, tight, no noise. Input shaft seal could use replacement Rear cross member with torn trans mount, you want a new one anyway. Stock shifter and rubber Shifter boot Chromoly Cross member relocation bars Ships on a small pallet, buyer to pay actual cost, will help find least cost option. $110 1@ Manual drive shaft with solid GMB u-joints, only 8 miles since rebuild. Painted blue$300 1@ HKS 225 mm flywheel, very rare. Only 9.6 pounds, made of ductile iron$50 1@ 88 Intercooler, usual bent fins but no bent tubes or trashed, easily made very nice.$20 1@ Ignition key assembly with trunk too [no doors], 2 OEM keys $400 1@ 88 Cloth Black tan interior, nice but not perfect. includes: pending pictures/buyer approval Driver/pass seats Rear seat bottoms and backs Rear shoulder and side panels Vanity style visors Door skins Center mirror Overhead dome light trim Side stereo trim panels Door sills Ships on a small pallet, buyer to pay actual cost, will help find least cost option. $50 1@ Non-intercooled black side moulding rub strips, rare dealer option$30 1@ Windshield wiper Deck garnish no cracks$20 1@ Windshield piper deck garnish, slight sun rot but no cracks $60 1@ Monroe GT2 struts front/rear, low mileage, no springs/tops (available if you want them) $50 1@ 88 Gas tank, no rust$50 1@ 86 Gas tank, no rust Prices do not include shipping, I'll work with you on best options. Prefer UPS, USPS, and USPS priority flat rate. Accepting money orders or pay-pal. Pay-pal requires an additional 4 % added to the final cost to cover their fees. Will make deals on multiple-item package deals. Pictures only provided for serious buyers ready to pay and need confirmation of condition. Don’t have time or access to host pics, or send endless emails for all this stuff. Please PM to keep the topic clutter free. No dibs with out deposit. Will update daily as parts are sold. Quote Link to comment Share on other sites More sharing options...
89BananaQuest Posted May 21, 2012 Report Share Posted May 21, 2012 You would t by any chance want to sell the auto to manual braces would ya? I did a swap in mine got my cross member moved usig a few peices of angle iron as my relocation brackets. Looking to make a set of beefier ones. But if u dont wanna part the swap i understand but could u maybe post some pics of it? Quote Link to comment Share on other sites More sharing options...
Chad Posted May 21, 2012 Author Report Share Posted May 21, 2012 The bars are inch by quarter inch chromoloy steel, they flex a little but won't bend easily. Just two flat bars with holes drilled in them to space the cross member forward. Worked so well, when I pulled the motor the trans hung from the bars and didn't bend them like it would if they were standard mild steel. You can buy this material at lots of places, I used mcmaster.com, part number 6554K113 . that had enough leftover material to make the upper braket to attach the clutch pedal frame to the unibody. Your angle iron solution is probably fine if you used material that is adequately thick. Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted May 21, 2012 Report Share Posted May 21, 2012 (edited) $45 1@ Black 88 Center arm rest console, very good shape, good latch interested^^ $400 1@ 88 Cloth Black tan interior, nice but not perfect. includes: Driver/pass seatsRear seat bottoms and backsRear shoulder and side panelsVanity style visorsDoor skinsCenter mirrorOverhead dome light trimSide stereo trim panelsDoor sills definitly interested ^^^have paypal deposit ready can (will) pickup in lincoln city pm ing you ..... Edited May 21, 2012 by JohnnyWadd Quote Link to comment Share on other sites More sharing options...
Chad Posted May 21, 2012 Author Report Share Posted May 21, 2012 definitly interested ^^^have paypal deposit ready can (will) pickup in lincoln city pm ing you ..... replied Quote Link to comment Share on other sites More sharing options...
Chad Posted May 21, 2012 Author Report Share Posted May 21, 2012 added torque tube shaft and coupler. Also stock K&N air Filter. Quote Link to comment Share on other sites More sharing options...
boston Posted May 22, 2012 Report Share Posted May 22, 2012 (edited) do YOU have for sale fuel injector for 88 Edited May 22, 2012 by boston Quote Link to comment Share on other sites More sharing options...
Chad Posted May 22, 2012 Author Report Share Posted May 22, 2012 blue or black injetor, or both? I have a set that is good, but han't been used in a while. probalby best to have them cleaned. Quote Link to comment Share on other sites More sharing options...
boston Posted May 22, 2012 Report Share Posted May 22, 2012 (edited) black injector ( L ) HOW MUCH FOR BOTH Edited May 22, 2012 by boston Quote Link to comment Share on other sites More sharing options...
Dodge2004srt4 Posted May 22, 2012 Report Share Posted May 22, 2012 black injector ( L ) HOW MUCH FOR BOTHDid he even list one as available for sale? Put up a WTB post, seriously dude the spam is annoying. Chad, Sending you a PM for stuff you "listed" for sale. Quote Link to comment Share on other sites More sharing options...
boston Posted May 22, 2012 Report Share Posted May 22, 2012 (edited) Edited May 22, 2012 by boston Quote Link to comment Share on other sites More sharing options...
starionhk Posted May 22, 2012 Report Share Posted May 22, 2012 Hi would u have Starion tail lights by any chance ? Starion tail lights only please ? Quote Link to comment Share on other sites More sharing options...
Chad Posted May 22, 2012 Author Report Share Posted May 22, 2012 No tail lights, just what is listed for now. Didn't find the 88 injectors, I have some, but I'm not in a place to dig them out, need to clear this stuff out first. Quote Link to comment Share on other sites More sharing options...
TylerQuest Posted May 23, 2012 Report Share Posted May 23, 2012 I'll take the steering box. PM'd you. Quote Link to comment Share on other sites More sharing options...
litebulb Posted May 25, 2012 Report Share Posted May 25, 2012 PM'd Quote Link to comment Share on other sites More sharing options...
lionking Posted May 25, 2012 Report Share Posted May 25, 2012 I'll buy the 86 MAS with good boot, tested good for $25, what is your PayPal Quote Link to comment Share on other sites More sharing options...
1987tsi Posted May 28, 2012 Report Share Posted May 28, 2012 ChadPlease check Personal Message.Thanks Quote Link to comment Share on other sites More sharing options...
BradD Posted May 30, 2012 Report Share Posted May 30, 2012 $50 1@ Non-intercooled black side moulding rub strips, rare dealer option These still avail? OEM never installed? Full set? Pictures avail? Quote Link to comment Share on other sites More sharing options...
litebulb Posted May 31, 2012 Report Share Posted May 31, 2012 Chad, PM'd you but no response. By windshield wiper garnish...do you mean the grilles (cowl grilles) if so I'll take the $30 pair to 44060. PM me with your paypal acct name! Thanks! Quote Link to comment Share on other sites More sharing options...
litebulb Posted May 31, 2012 Report Share Posted May 31, 2012 Will the grilles fit 87-89? Thanks! Quote Link to comment Share on other sites More sharing options...
billmongold Posted May 31, 2012 Report Share Posted May 31, 2012 pmed about gauge hood and torque tube Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted June 11, 2012 Report Share Posted June 11, 2012 Im still in for the seats hit me up Chad. Quote Link to comment Share on other sites More sharing options...
87redcat Posted June 11, 2012 Report Share Posted June 11, 2012 Chad, interested in the 1G MAS.PM sent Quote Link to comment Share on other sites More sharing options...
RGAV8R Posted June 18, 2012 Report Share Posted June 18, 2012 Hey Chad,I sent you a PM but have not received a response.I need the speedo cover w/switches:$15 1@ Black Gage hood with side switches, couple small scratches, untested but presumed goodshipped to 29036.Let me know how much and thanks, Quote Link to comment Share on other sites More sharing options...
BlackAndBoosted Posted June 21, 2012 Report Share Posted June 21, 2012 $40 1@ 1gen DSM MAS with good boot, tested good. still available? do need... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.