Komeuppance Posted April 24, 2012 Report Share Posted April 24, 2012 http://home.comcast.net/~Komeuppance/LedTails.jpgLOL... well, just the license plate lights are LED's. Required some minor rewiring. You can also see my new HID fog lights, not quite the beam pattern I hoped they'd be but they should perform well in foggy conditions on the mountain pass. Better get used to this view... har hAR HAR... -Robert 1 Link to comment Share on other sites More sharing options...
27kquest Posted April 24, 2012 Report Share Posted April 24, 2012 Hawt Link to comment Share on other sites More sharing options...
Technology Posted April 24, 2012 Report Share Posted April 24, 2012 (edited) http://i.imgur.com/x0vUR.gif Edited April 24, 2012 by Technology Link to comment Share on other sites More sharing options...
JohnnyWadd Posted April 24, 2012 Report Share Posted April 24, 2012 Hella tite bro! Link to comment Share on other sites More sharing options...
jake88starquest Posted April 24, 2012 Report Share Posted April 24, 2012 Nice! i was trying to fig out a way to do my plates as well! did it to my daily(Denali) What bulbs did u end up going with? and did u basicly cut wires and Solder in new sockets? Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted April 24, 2012 Report Share Posted April 24, 2012 Link to comment Share on other sites More sharing options...
Austin88ESiR Posted April 24, 2012 Report Share Posted April 24, 2012 Nicely done. I have LEDs in my running lights, turn indicators and sidemarkers. My dash and instruments have LEDs as does the interior door, dome and spot lights. The license plate is the last area I need to do. Link to comment Share on other sites More sharing options...
D_Venable Posted April 24, 2012 Report Share Posted April 24, 2012 yeah, i still need to do the license plate as well, but I think I've got the rest covered http://www.26liter.us/gallery/albums/userpics/10030/DSCF6023.jpg Link to comment Share on other sites More sharing options...
TexasQuest Posted April 24, 2012 Report Share Posted April 24, 2012 Nice. I've done the plate led bulb conversion too. Link to comment Share on other sites More sharing options...
The Rabbit1 Posted April 24, 2012 Report Share Posted April 24, 2012 I did mine as well, will get a pic in a few hours. Link to comment Share on other sites More sharing options...
Komeuppance Posted May 16, 2012 Author Report Share Posted May 16, 2012 So where's them pics... LOL... The set of LED's I got were opposite polarity for what the car was set up as, so I opened the trunk and slightly modified the connector on the harness to fit in the other way around/upside down. No rewiring FTW. -Robert Link to comment Share on other sites More sharing options...
Burton Posted May 16, 2012 Report Share Posted May 16, 2012 So where's them pics... LOL... The set of LED's I got were opposite polarity for what the car was set up as, so I opened the trunk and slightly modified the connector on the harness to fit in the other way around/upside down. No rewiring FTW. -Robert Couldn't you have just turned the bulb 180 degrees in the socket? I'm trying to remember what that bulb looks like but I thought it was one of the ones that could be put in either way. Link to comment Share on other sites More sharing options...
Recommended Posts