fuel Posted July 22, 2011 Report Share Posted July 22, 2011 Hey guys, have come across a local junkyard which has a bunch of 4cyl Magnas mostly complete, they're clearing alot of their stock to make way for newer vehicles, so am in the position of picking up these cylinder heads and inlet manifolds for reasonable pricing. Just wondering if there would be a demand for either the cylinder heads or inlet manifolds over there? I imagine yes on the inlet manifolds, but what about the whole cylinder heads complete? I don't know a great deal about 4G54s (I'm a 4G63 man myself) but I gather the Magna M6 head is some kind of improvement? I would also have to find out if the freight costs outbound of New Zealand will make it worthwhile also - I've sent a couple cylinder heads to Australia and the freight cost was reasonable. Let me know. Thanks,Phil Quote Link to comment Share on other sites More sharing options...
NotStock88 Posted July 22, 2011 Report Share Posted July 22, 2011 down for a head depending on price Quote Link to comment Share on other sites More sharing options...
wrngwae Posted July 22, 2011 Report Share Posted July 22, 2011 i too would be interested on both depending on price with shipping... Quote Link to comment Share on other sites More sharing options...
lyons8821 Posted July 22, 2011 Report Share Posted July 22, 2011 Same here let us know. Quote Link to comment Share on other sites More sharing options...
89PalermoSHP Posted July 22, 2011 Report Share Posted July 22, 2011 Interested in an intake if its near the $100-$150 mark. Quote Link to comment Share on other sites More sharing options...
Frenchi934 Posted July 22, 2011 Report Share Posted July 22, 2011 also might be interested in head/ intake. the magna head (depending on generation) has larger ports, which flow better, (also allow for one to upgrade to multiport injection) Quote Link to comment Share on other sites More sharing options...
allen405 Posted July 22, 2011 Report Share Posted July 22, 2011 Interested in an intake if its near the $100-$150 mark.me too Quote Link to comment Share on other sites More sharing options...
quest1988 Posted July 22, 2011 Report Share Posted July 22, 2011 Me three Quote Link to comment Share on other sites More sharing options...
fuel Posted July 22, 2011 Author Report Share Posted July 22, 2011 Ok cool I shall investigate costs of the items and the freight and see where it sits in regards to your budget. I would imagine an inlet manifold at $150 delivered should be do-able, perhaps not the cylinder heads though. Quote Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted July 23, 2011 Report Share Posted July 23, 2011 i'd be in too Quote Link to comment Share on other sites More sharing options...
Zone Posted July 23, 2011 Report Share Posted July 23, 2011 (edited) Interested in an intake if its near the $100-$150 mark. Ok cool I shall investigate costs of the items and the freight and see where it sits in regards to your budget. I would imagine an inlet manifold at $150 delivered should be do-able Sounds legit!!! Edited July 23, 2011 by Zone Quote Link to comment Share on other sites More sharing options...
topher87 Posted July 23, 2011 Report Share Posted July 23, 2011 in for both barring cost Quote Link to comment Share on other sites More sharing options...
wrngwae Posted July 23, 2011 Report Share Posted July 23, 2011 to add to my interest, you should also get the fuel rail, injectors, and fuel pressure regulator for the intake manifold too...... Quote Link to comment Share on other sites More sharing options...
ColdScrip Posted July 23, 2011 Report Share Posted July 23, 2011 Down for an intake manifold, fuel rail, etc. Quote Link to comment Share on other sites More sharing options...
89PalermoSHP Posted July 23, 2011 Report Share Posted July 23, 2011 to add to my interest, you should also get the fuel rail, injectors, and fuel pressure regulator for the intake manifold too...... Fuel rail and regulator for me and allen405 too please. Quote Link to comment Share on other sites More sharing options...
scott87star Posted July 23, 2011 Report Share Posted July 23, 2011 Head for me. Scott Quote Link to comment Share on other sites More sharing options...
Bill R Posted July 23, 2011 Report Share Posted July 23, 2011 interested in the intake manifold, fuel rail, and head etc. if price with shipping is low Quote Link to comment Share on other sites More sharing options...
ekstatixx Posted July 23, 2011 Report Share Posted July 23, 2011 When I was importing these over from aus, it was cheapest to box 4 together as "broken car parts for repair". Shipping them by them selves will cost almost as much for 1 as shipping all 4 together Just some info as I've been there done that Quote Link to comment Share on other sites More sharing options...
fuel Posted July 24, 2011 Author Report Share Posted July 24, 2011 yeah I figured it was probably cheaper to send a bulk lot there, but then I would have to find someone trustworthy to receive them, split them up and send them individually to each person - that alone could well not be worthwhile as opposed to sending each individually from my end. Cheers,Phil Quote Link to comment Share on other sites More sharing options...
TurboDoorHandles Posted July 24, 2011 Report Share Posted July 24, 2011 The m6 and m7 are the good heads correct? I'd be interested in some heads, and one lower half of a intake manifold, Pm me when you get prices. Quote Link to comment Share on other sites More sharing options...
wrngwae Posted July 24, 2011 Report Share Posted July 24, 2011 (edited) Phil, if you need to bulk ship to somewhere i could help you out. i am trustworthy and i work at a warehouse in Indiana so shipping may be cheaper to a commercial address. and im mostly center of the U.S. So splitting the order should be pretty even for most. we also ship and receive overseas containers but im sure your not going to ship that much lol.... Edited July 24, 2011 by wrngwae Quote Link to comment Share on other sites More sharing options...
383chevelle Posted July 25, 2011 Report Share Posted July 25, 2011 I would be interested in a head and intake with fuel rail and injectors. As long as the price isnt crazy. Quote Link to comment Share on other sites More sharing options...
fuel Posted July 27, 2011 Author Report Share Posted July 27, 2011 What are you willing to pay for a head + manifold + fuel rail + injectors? Just bare in mind with getting the parts and freight there's no way I could do that for anything less than US$300-400, so I need to gauge realistic interest to see if it's even worth it before approaching the yard. Cheers! Quote Link to comment Share on other sites More sharing options...
scott87star Posted July 27, 2011 Report Share Posted July 27, 2011 I'd ante up $200 for a good (no cracks, cam towers included) used head, plus shipping of course. Scott Quote Link to comment Share on other sites More sharing options...
383chevelle Posted July 27, 2011 Report Share Posted July 27, 2011 sounds good to me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.