Alcyone Posted April 6, 2011 Report Share Posted April 6, 2011 I have a near complete car. but it's pretty worn out in lots of ways. 87 model five speed.there's a few things I know are good.like the 88 computer upgrade.the turbo was good but's been sitting for a while in the trunk so...radiator was rodded. fans are good. no head.had a new vac advanceI have a three piece dam that would need a LOT of work. the interior is complete but all the seams are starting to pull.things of that nature. let me know what you might need.I am not going to ship the tranny or block. also if you can thing of small things that might be needed that I could pay forward before I recycle... like that idea a lot for small bits that ship easily.I would have fixed it but I found some frame rot. and honestly I have moved on.since I don't come by here much anymore I can be reached by email easier.sorrowsixstar AT gmail DOT com Quote Link to comment Share on other sites More sharing options...
Frenchi934 Posted April 6, 2011 Report Share Posted April 6, 2011 what color was the car (interior/exterior)? Quote Link to comment Share on other sites More sharing options...
Alan Posted April 6, 2011 Report Share Posted April 6, 2011 where in AL are you? Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted April 6, 2011 Report Share Posted April 6, 2011 I need a drivers side windsheild cowel Quote Link to comment Share on other sites More sharing options...
spoolinup Posted April 6, 2011 Report Share Posted April 6, 2011 do yu have the headligt switc assembly Quote Link to comment Share on other sites More sharing options...
bigjoe Posted April 6, 2011 Report Share Posted April 6, 2011 i need black radio cluster ? Quote Link to comment Share on other sites More sharing options...
Alcyone Posted April 7, 2011 Author Report Share Posted April 7, 2011 (edited) hey guys! it's red with black. Warren from Pleasant grove has said he wants the whole thing.right now he's got first dibs. he's got a day or two too decide if he can pick it up. then I will take these requests as recieved. I have the cowl piece the switch but not the radio bits. if he doesn't buy the whole thing. I will check in ASAP on the status of this. Oh.. Sylacauga Alabama Edited April 7, 2011 by Alcyone Quote Link to comment Share on other sites More sharing options...
swapped87 Posted April 8, 2011 Report Share Posted April 8, 2011 Do you have the right side engine mount? I need the whole thing, from where it bolts to the engine to where it bolts to the frame. Quote Link to comment Share on other sites More sharing options...
Alcyone Posted April 8, 2011 Author Report Share Posted April 8, 2011 yep mount is there, was fine. haven't heard back yet from my potential buyer. in two days I start getting some parts ready to ship. Quote Link to comment Share on other sites More sharing options...
kstokes606 Posted April 8, 2011 Report Share Posted April 8, 2011 Need a hood prop rod, wastegate actuator, and speed control unit with the cable and mount, if you part it out. Quote Link to comment Share on other sites More sharing options...
kstokes606 Posted April 8, 2011 Report Share Posted April 8, 2011 Also need a stock air filter can, compressor housing or turbo, A/C tension pulley assembly and ECU. Quote Link to comment Share on other sites More sharing options...
Alcyone Posted April 10, 2011 Author Report Share Posted April 10, 2011 okay so nothing back from the guy locally. oh well. I am off work tomorrow and will sort through this list and send PMs. Quote Link to comment Share on other sites More sharing options...
broadwayfrog Posted April 11, 2011 Report Share Posted April 11, 2011 i need the fuel line from the gas tank... Broadwayfrog@aol.comThanks,Paul Quote Link to comment Share on other sites More sharing options...
twitch Posted April 11, 2011 Report Share Posted April 11, 2011 how much for the center console to the radio Quote Link to comment Share on other sites More sharing options...
kstokes606 Posted June 3, 2011 Report Share Posted June 3, 2011 Need a hood prop rod, wastegate actuator, and speed control unit with the cable and mount, if you part it out. Also need A/C tension pulley assembly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.