Jump to content

Ok it's On,,,stedebani Gp is a go


quikconq
 Share

Recommended Posts

HUH? I clicked on that website and it tries to have you sighn into the mail portion? I take it you were trying to show pictures and parts list from that link. Got any other way to show what's listed in the suspension bushings?

 

Wizard

 

the first post has been updated

 

thanx

bryen

Edited by quikconq
Link to comment
Share on other sites

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Note to you guys getting the short shifter. It is amazing!!! I do recommend you grab an extra nylon bushing or two because this piece will break apart after a while. Mine took about 4 years of daily driving and 40-60k of abuse before it busted, which seems fair for a bit o plastic. One of the best mods you can do - besides the poly suspension bushing kit. PITA to install, but rides like a new car. rock on GP
Link to comment
Share on other sites

90% is for the rear end subframe assembly. things not included would be: end link bushings, sway bar bushings, and torque tube bushings.

 

im also wondering about the long bolt that holds the hub to the control arm. i dont think most people are aware they would need this until its painfully obvious.

 

 

yes. the vast majority need to be cut out to be removed. Those 10" bolts are a huge pita to bust loose. Better to have em and sell em IF not needed, than have the car down for another week or do the job twice.

Link to comment
Share on other sites

Got an email from steve today and looks as tho ,he is willing

to make this a go,if the gp totals at least 3500

 

here is steve's email

 

With a $3,500 minimum GP total order we can offer the following:

 

Short shift 17 degree bend $109  (see note)

Suspension bushings -------$189

Motor Mounts-------------- $109

Rear Mounts--------------- $109

Manual Trans Mount-------- $69

rear hub bolts-------------$75

shifter nylon bushing ----------$ 5.00 available

 

contents of the bushing kit are as follows:

1) 2 radius rod A Bushings

2) 2 radius rod B bushings

3) 2 Front control arm A bushings

4) 2 front control arm B bushings

5) 2 rear control arm forward Inner A bushing

6) 2 rear control arm forward inner B bushing

7) 2 rear control arm rearward inner A bushing

8) 2 rear control arm rearward inner B bushing

9) 2 Rear control arm rearward inner bolt sleeve (steel)

10) 4 Rear control arm forward and rearward outer bushing

11) 2 Torque tube support cross member A bushing

12) 2 Torque tube support cross member B bushing

13) 1 grease

 

 

 

1/2 down is required.

Free shipping with 100% down.

Flat rate shipping for 1/2 down orders is $16.

GP order end date is midnight 4/18/2010.

GP ship date no later than 5/10/2010.

If GP min. is not met, 100% refund immediately after close date.

All order must be paid prior to shipping.

Paypal Stedebani@aol.com or check payments (must clear) only

 

 

Post up

 

 

Me---------------2 S.S.,diff mounts,,trans mount

phinko-----------diff mounts,4 nylon bush,trans mount

smallblock12-----trans mount

jwbrocloud-------S.S.

ragdoll----------S.S.,,trans mount

outcast----------S.S.

drybear----------S.S.

freetoskate------S.S.

crazy larry----- S.S.----------------PAID

 

M Code ------(4) Shifter nylon bushings Paypal already sent. Thanks!!!

Link to comment
Share on other sites

Note to you guys getting the short shifter. It is amazing!!! I do recommend you grab an extra nylon bushing or two because this piece will break apart after a while. Mine took about 4 years of daily driving and 40-60k of abuse before it busted, which seems fair for a bit o plastic. One of the best mods you can do - besides the poly suspension bushing kit. PITA to install, but rides like a new car. rock on GP

 

the shifter is the whole shifter right? :) not just the nob.

who do i make the payment to? and when can i expect it to be here?

thanks. sorry for being a nob :)

Link to comment
Share on other sites

a nob???

 

the short throw shifter that stedebani offers is a kit,,,that uses some parts from

the stock shifter,,to make ,probably THE best short shifter availible for the starquest

its not just a knob

 

im still waiting on pictures from steve

Link to comment
Share on other sites

a nob???

 

the short throw shifter that stedebani offers is a kit,,,that uses some parts from

the stock shifter,,to make ,probably THE best short shifter availible for the starquest

its not just a knob

 

im still waiting on pictures from steve

 

oh yea stedebani is the one i've heard good things about. how do i pay? :)

 

nob as in a door knob :) but could also be used to describe a body part

Link to comment
Share on other sites

sent 114.00 for shifter and the nylon bushing. no shipping charges right?

where will it get shipped to? :)

 

wat do you mean where will it be shipped to???hopefully your paypal has your current address

like most peoples do

 

you better confirm that your address is current on your paypal details

Link to comment
Share on other sites

wat do you mean where will it be shipped to???hopefully your paypal has your current address

like most peoples do

 

you better confirm that your address is current on your paypal details

 

 

yeah thats a good catch. i'll go sort that out :)

when is it getting shipped? :)

Edited by LM13
Link to comment
Share on other sites

Just so I'm clear, the "suspension bushings" are the rear sub frame bushings correct? And you're recommending to get the bolts to for the $75?

 

 

When is this stuff supposed to ship?

Link to comment
Share on other sites

Just so I'm clear, the "suspension bushings" are the rear sub frame bushings correct? And you're recommending to get the bolts to for the $75?

 

 

When is this stuff supposed to ship?

 

the suspension kit includes the rear and the fronts

the first post has exactly wat is included

and yes to the bolts,,you could sell them later if you

are lucky enough to get yours out.

The first post also has the shipping date

Link to comment
Share on other sites

90% is for the rear end subframe assembly. things not included would be: end link bushings, sway bar bushings, and torque tube bushings.

 

im also wondering about the long bolt that holds the hub to the control arm. i dont think most people are aware they would need this until its painfully obvious.

 

Yea, I'm interested in those control arm bolts as well... Only 2 for $75?? Or do you get all 6 for the rear control arms?

 

Zack K.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share


×
×
  • Create New...