importwarrior Posted September 8, 2015 Report Share Posted September 8, 2015 Provided by :Button Here is his store:http://stores.ebay.c...=p2047675.l2563 Conquest Store:http://stores.ebay.c...d=p4634.c0.m322 Plug:http://www.ebay.com/...=item58acaec281 Pulley:http://www.ebay.com/...sd=141207061644http://www.ebay.com/...sd=141207061644 Bracket:http://www.ebay.com/...=item255ba579cf Sensor:http://www.ebay.com/...ab845a2&vxp=mtrBWD Part No. CSS12PBWD Part No. CSS12PSTANDARD MOTOR PRODUCTS Part # PC19TSTANDARD MOTOR PRODUCTS Part # PC19AIRTEX / WELLS Part # 5S1739AIRTEX / WELLS Part # 5S1740 Pigtail:http://www.ebay.com/...WPT579&_sacat=0Dorman Part # 49813STANDARD MOTOR PRODUCTS Part # HP4710AIRTEX / WELLS Part # 1P1258 {#3U2Z14S411SMA, 626}MOTORCRAFT Part # WPT579 The sensor and pigtail are for a 1998 Ford Escort with the 2.0L SOHC Alternate SensorProvided by:Scott87Star Hall Effect SensorPig tailhttp://www.digikey.com/product-detail/en/1838266-3/A97665-ND/1764180 Sensorhttp://www.digikey.com/product-detail/en/GS100101/CH704-ND/418211 Link to comment Share on other sites More sharing options...
stesir Posted September 8, 2015 Report Share Posted September 8, 2015 MKI? Link to comment Share on other sites More sharing options...
importwarrior Posted September 8, 2015 Author Report Share Posted September 8, 2015 What's the question??? Link to comment Share on other sites More sharing options...
TexasQuest Posted September 9, 2015 Report Share Posted September 9, 2015 Good job importwarrior. This should be stickied. Link to comment Share on other sites More sharing options...
importwarrior Posted September 9, 2015 Author Report Share Posted September 9, 2015 Thank you. I believe it is. Link to comment Share on other sites More sharing options...
psu_Crash Posted September 10, 2015 Report Share Posted September 10, 2015 (edited) Just FYI for anyone wanting to run that pulley with an aftermarket radiator. I run the *DM rad which is 3 core I believe. It puts the trigger wheel VERY close to the radiator. You will have to trim the stock shrouds (if that's what you use) to make it fit. One of the reasons that I went with the MM CAS instead in the long run. Edited September 10, 2015 by psu_Crash Link to comment Share on other sites More sharing options...
importwarrior Posted September 10, 2015 Author Report Share Posted September 10, 2015 Good info thank you. Link to comment Share on other sites More sharing options...
scott87star Posted September 10, 2015 Report Share Posted September 10, 2015 You can also use a Hall Effect sensor with those trigger wheels: http://www.digikey.com/product-search/en?keywords=CH704-ND The Hall effect ones are less prone to signal noise, VR sensors are quite sensitive to noise as the signals are very weak and the best place to run one on our motors is right next to the alternator. Don't forget the pigtail! They also work great as VSS (Vehicle Speed Sensors) which allows the use of the traction control feature in the megasquirt family of aftermarket ECU's. If you drag race and DON'T have traction control, well, that's why you're getting beat. Link to comment Share on other sites More sharing options...
Recommended Posts