daughter #1 call'd 5:45 am to ask if i could bring my utility trailer and help them move stock from her husbands ware house to storage ,, the ware house was 80 miles away she had a 26 or 28 ft u-haul truck she would be driveing ,, that alone was enought to make me take along a few xany's skip ahead 7 hours and we're load'd up for the first trip (will take 2or 3 more trips ) about half the way home she makes a left hand turn onto a county road ,to her rtight about an 1/8th miles away was a cu

Tonight on my way home, I suddenly noticed my hydraulic lifters were tapping. I look at the oil pressure, it was not LOW LOW, but it was less than half while driving. So, I found the closest lit parking lot to pull over in, and check things out. I pulled the dipstick out and it was bone dry. Just then, a female village cop rolls up and asked if I was all set. I said no, I had tried phoning my friend but he did not pick up, and I needed oil. She said she could give me a ride to the station i

these XXRs are lightweight and great looking. best of all they come in sizes and offsets that fit the starion without spacers and are only $500 to $600 for the set   527 and 530 styles come in the following sizes 17x9.75 +25 and 17x8.25 +25 18x9.75 +20 and 18x8.75 +20   521 18x10 +20 and 18x8.5 +25   526 17x10 +20 and 17x9 +25   http://www.nlmotoring.com/XXR-Sportmax-Wheels-s/32.htm

Some of you know that im going to be making a stock replacement tubular manifold soon (as well as other for guys that want bigger). Well today Jesse (our fabricator) and I got to thinking about the downpipe issue. Before we make the manifolds we were thinking to offer a downpipe is divorced and open dump. We do that now on our Evo stuff. Guys are getting great gains from them and we thought why no start with that. Im going to get some before and after dyno runs once get to making them. I would a