I tried to put this in the engine mods forum but it would not let me post.While my car is down while I am doing the suspension I decided to tweek a couple things.I had been running the AIC system with 2 480CFM injectors mounted in the OVC pipe and decided to drill the intake runners and mount the injectors where the 2 intake runners split into 4.Cant be any worse than the fuel puddleing up in the OVC pipe and just oozing down into the T/B.Since I already have all the stuff so its only costing m

So I get done doing an oil change on my neighbors car. My 5 gallon oil collection jug was full so I decided to take it to the local auto parts store to recycle. Picked it up then set it on the driveway so I could open my tailgate. Well the jug must have gotten damaged by the sun because when I set it down the bottom broke and I watched 5 gallons of used oil pour down my driveway. Cleaning that up kinda sucked.

Gentlemen,   I'm working on a little side project that may turn into a super cool future group buy. But to get it done I need original "Starion" and "Conquest" logo templates. They need to be in the original script/font style, and I can work with just about any type of format.   Cheers and Thanks, Nick

So I took the front of my engine apart. I'm getting everything ready to do all the chains and gears and guides. I was taking off all the chain guides and that one shouldered bolt that I believe holds on 2 of the guides just broke. I wad using a 1/4 ratchet and barely put and pressure on it and it snapped off in the block. What's the best methods of getting this out. it seems like it's too small a bolt to use a bolt extractor on. Any ideas guys??   -Justin