Ok im going to start this thead so other people dont make the same mistake and you can also add things not from rockauto   front lower control arm bushings http://www.rockauto.com/catalog/moreinfo.php?pk=1284997&cc=1062470 they are too skinny and too short   if you have a 3 bolt idler arm dont get these http://www.rockauto.com/catalog/moreinfo.php?pk=493504&cc=1062470 i found that out the hard way and if you have a 2 bolt you need 2 of them   trans mount http://www.rockauto.com/catalog/m

DNJ VC101G valve cover gasket kit for the 2.6 at RockAuto:   http://www.rockauto.com/info/RockProducts/VC101G.jpg   The little guy looks surprised and scared!

In addition to the 1.0mm Oversize stainless valves, I have now added stainless valves with the stock valve head dimentions. Also Hydraulic rocker shafts and camshafts.     Dad     Take a look here.....http://www.enginemachineservice.com/conquest.html

looking for a solenoid asap in the texas area, I can get one at auto zone for 44.99 special order. lmk what you have. Thanks again.   I am also looking for a site that has the solenoid rebuild kits available. Didn't find one on ebay or autozone.