Provided by: Mike C.     The factory/dash oil pressure gauge is not calibrated very well. The display itself is pretty good... it's the sensor unit that varies considerably. Some sensors will start indicating with only a few psi oil pressure; others (most) seem to require about 20 to 25psi before they'll make the needle budge. On most StarQuests, each 1/4 of the display is about 25psi. In theory then half-scale would be 50psi IF the sensor was one of the "good ones" that starts working at only a

looking for a front nose bra for my starion must be in or as close to mint as possble. prefer WOLF brand but any might do. would love to have a factory one with the turbo intercooler stitching on it . please send pix to chassispuke71@gmail.com and please ad price shipped to compton ca 90220 thanx.

I need a passanger side brake bracket and the slider bolts

i installed a oil pressure gauge in the side of the block and mounted the sender on the fire wall.   i got the Kunigawa -4 A/N by 1/8 BSPT ( tapered )   http://www.ebay.com/...6-/181900298482   then ordered the 4 an hose from Pegasus racing pre-made. can get them from anywhere. just measure the length you need and get the closest to your needs it is PTFE teflon lined SS hose   https://www.pegasusa...n.asp?Product=4   1/8 NPT Female to -4 A/N adapter   http://www.summitrac...04erl/overview/   dep