Well I think I made a mistake when hooking up my fuel feed to the magna rail. What I did was I put a 90 degree fitting in the fuel rail end closet to the TB and ran a -4 an feed to it from the fuel filter. The other side closet to the firewall was capped. I see that everyone else ran a banjo bolt to the other end and capped the TB side of the rail. Is there any problem with the way I have hooked it up?   Also, I plan on running fuel to both sides of the rail, and I was wondering if the DSM banj

no engine or transmission

Like the title says, I need a stock fuel feed line from the filter to the Throttle body as well as the banjo bolt for the fuel filter and the copper washers. This will be used as a feed line for my magna fuel rail. Thanks.

i pulled my motor and i am gunna compare the weight of stock versus my moded assembly   stock with all bolts and no clutch came in at a chuby 95lbs     http://i17.photobucket.com/albums/b84/trippleCing/P7210016.jpg       http://i17.photobucket.com/albums/b84/trippleCing/P7210018.jpg