http://www.dsmtuners.com/forums/showthread...threadid=103469   there is a down load in the first post that might help you out.

I'd like to use aircraft paint stripper on the urethane front bumper cover to get rid of the old paint before I repaint it.  Is this stuff ok to use on such a material?   Thanks MANGO

I have a injector bench. But you can build one to clean and check your spray patteren. What you need- Compressed air set to 40 psi-rubber tip spray gun- 3 feet of 3/8 hose- clamp- injector clip- 9 volt battery- carb cleaner- Safty glasses. Solder the battery to the injector clip. Attach hose to injector and clamp it. Fill hose to 3/4 full of carb cleaner, hook up the clip and introduce air at hose. the cleaner will clean it and you can see the patteren. Low budget but it works. WEAR THE GLASSES!

i went to nopi and they have a ciolover set for the conquest made by ground contol and i want to know if it would help the handing and what is the best strut i can use for them cause besides the upgraded swaybar my suspension is stock and some people say  lowerd spring handle better  what do you think i should do?