I finally found a set of 18" wheels for the Starquest with the right offsets!!! yes i said the right offsets...no spacers or tire rubbing.  they are made for the 350z or g35 with the brembo brakes.  my fronts are 18x8.5 (20mm offset) running a 235/40/18.  my rears are 18x9.5 (25mm offset) running monster 265/35/18.  there are tons of wheels styles to choose from and sizes to 20".  I don't have pics yet, but they will be up A.S.A.P.  BTW my quest has stock non-SHP Springs and struts, so I don't k

Hey all, im pickin up a 87 Starion hopefully within this week. Its for 400 bux and the body is pretty straight except for the drivers fender has a decent dent in it/ airdam / small dent in back corner. The guy says it smokes, I had him start it and it was cold out so there was some white smoke just from it being cold but i really didnt see mutch. I asked him to leave  the car running and he did for like 5 min and he said see there its smoking. It was looking to me like it was still white just fr

http://www.cardomain.com/memberpage/682196/7 unfortunately dont know how to post pictures sorry...   also on pervious page is how the car sat before i put on the skirts, thought it was too high so dropped it again, now problem is shockers gone... obviously need new ones, any you guys had this problem, and needed shorter struts to be inserted becasue cars so low, if so what you guys use ????     cheers....

I hooked a light up to the boost solenoid wires from the igniter to see when the car started to Detonate. Anybody else tried this? Light always seems to come on at 4000 rpm, car would still be pulling strong and into rich on my air/fuel gauge.Doesn't seem to matter how much boost. I have plenty of fuel from my 255 walbro pump and my aeromotive regulator with 1:1 rate of rise and set at 50 psi.My timing is at 8 ATDC.Car runs good and pulls alright,but I guess need to install my EGT gauge to tell