dpstarion88

PM Sent

I know this is over a year old now...but just want to say I too had the same problem for quite a while now. I finally got around to searching why the same problem of cold rough idle and running fine when slightly warmed up. Sometimes it would be idling so rich it would spit black condensation or raw fuel out the tail pipe. Good thing this car isn't my daily driver and haven't racked to many miles like this. Should have been paying attention to those injector connectors.... -Dave

Same here -Dave

Yeah I agree with fully soldering and shrink tubing. I wouldn't go outta my way to buy something like I posted. Just putting it out there that it is possible with most likely not the greatest solder. I like using adhesive lined shrink tubing to make a weather proof seal. Found cheap at harbor freight tools http://www.harborfreight.com/42-piece-marine-heat-shrink-tubing-67598.html -Dave

^^ Yes sir you can with Low Temp solder found in these... http://www.delcity.n...ectors/p_805407 Those posted from mstieg found at harbor freight tools are just like you said... only adhesive lined and need crimping. These even these that are pretty much the same thing as thee above, made by G-Apex... but cant find anywhere that sells them. https://www.youtube....h?v=24FjjIVpk9U -Dave

Found one, Thank you MPGorBOOST for your offer. -Dave

Looking to buy a exhaust manifold that is not cracked. Stress relieved and or ported would be nice. Even a plain stocker is better then my cracked to hell mani. Let me know how much shipped to 95037...any pics would be greatly appreciated. Thanks, Dave

Pretty much what StarquestRescue said. The ecu knows the o2 sensor is working and turns off code 1 when the o2 sensor is up to temp. and is sending approximately 1V to the ecu. According to FSM it says to test for aprox. 1V from the o2 sensor while revving or "racing" the engine and while coolant temp. is between 185*F-205*F. Sounds like your ecu never receives that signal from the o2 sensor being bad. -Dave

Looks like Toyo offers a 245/45/16 again. How long have these been around, meaning rereleased in this size? From the looks of it on TireRack they are *NEW, as if they have been recently been added??? Saw that these tires were being talked about back in Dec. last year... mainly about the v pattern grooves not channeling water off to the shoulders for better rain traction. I could have swore looking around for 245/45s back then and didn't find these at that time?? -Dave http://i856.photobucket.com/albums/ab124/gtonerace_nos/Untitled_zps18236536.png

I have this type http://www.ebay.com/itm/5-Sizes-Valve-Spring-Compressor-Pusher-Tool-For-Car-Motorcycle-Automotive-Tool-/360747878934?pt=Motors_Automotive_Tools&hash=item53fe3fca16&vxp=mtr and this one as well http://www.sears.com/craftsman-valve-spring-compressor/p-00947627000P Have used the craftsman one before, just gotta watch while compressing the springs that the tool's fork that sits on top of valve retainer doesn't dig into the valve cover gaskets seating surface of the cylinder head. -Dave

Bought a couple of headlight switches from BOOSTED88tsi and they were priced nice and shipped out very quickly. Excellent communication and would be happy to buy from again. Thank you! -Dave

PMed

I got mine off of Amazon about a year and half ago, Indeed very cool info. Amazon is still cheaper then Ebay. -Dave http://www.amazon.com/Starion-Conquest-Performance-Portfolio-1982-90/dp/1855205718/ref=sr_1_1?ie=UTF8&qid=1391072722&sr=8-1&keywords=starion+%26+conquest+performance+portfolio

I'll take both headlight switches shipped to 95123. PMed -Dave

SOLD

TTT... $500 Shipped.

^-- What he said, I made the mistake of doing exactly that! Blah, The Autometer Z series gauge fits perfectly and was just under $60 shipped off of Ebay! Great gauge, nice that it has vac & boost. -Dave

Bought a coil a couple of weeks ago. Shipped very quick and at a great price. Great guy to deal with, thanks Jeff. -Dave

Thank you very much Brian for the ported mixer housing. Great pricing, super quick shipment and outstanding communication as always. Thank you again. -Dave

PM sent -Dave

That's what I thought. -Dave

The cheapest I see on the net is still TEP, $895 +tax and shipping. Forced Performance, $1150 +shipping. Does anyone know how to identify TD05 between TD05H? I keep seeing info on the net that says the 14G for Starquest is a 05 and some that say a 05H??? -Dave

Replied to your PM Johnny. -Dave

I have a brand spankin new TD05 14G that was originally purchased from TEP. The guy I bought it from was the original buyer. I planned to keep as a spare, but most likely never use it. Looking to get what I paid for it, $550 + shipping & PP fees. $500 SHIPPED! !!SOLD!! -Dave http://s856.photobuc...ideshow/New 14

Outstanding TPS upgrade kit, very quick shipment and kept me updated. Very happy overall, Thank you very much boostinmini! -Dave