Neckoslash Posted August 15, 2008 Report Share Posted August 15, 2008 I have some free time tomorrow so I'm gonna make it look more like an engine. I have the squirters in already but I used the original seals/washers. I'm almost at the point of no return and I'm guessing I shouldn't be using those over. I looked on dads site and didn't see them (Probably over looked them) anyone know where I can get a set? Link to comment Share on other sites More sharing options...
Indiana Posted August 16, 2008 Report Share Posted August 16, 2008 You may reuse them if they aren't chewed up Link to comment Share on other sites More sharing options...
MidMoTSI Posted August 18, 2008 Report Share Posted August 18, 2008 As Indiana said, they are reusable, but if you want new ones: MF660034, Gasket, Oil Jet 12mm. You'll need 8, they are still available from the dealer, $ .15 - $ .20 each. Link to comment Share on other sites More sharing options...
Dad Posted August 18, 2008 Report Share Posted August 18, 2008 If you have a lower end gasket set then they are included in it. Dad Link to comment Share on other sites More sharing options...
scooterh72 Posted September 18, 2008 Report Share Posted September 18, 2008 How about the oil squirters themselves? Where can a guy pick them up at? My engine is being built right now and the guy told me I have a broken one. Link to comment Share on other sites More sharing options...
Indiana Posted September 18, 2008 Report Share Posted September 18, 2008 buy used ones, can't get them any longer or maybe it was just one you can and one you can't, they are rights and lefts just post on the wanted board for one and which port it is that it goes in so you don't get one that will point the wrong direction and do no good Link to comment Share on other sites More sharing options...
Recommended Posts