Aluminum radio kit (PAYMENT DUE!!!)

[OutcastZeroOne]

Ive been asked about this by a number of members here after they have seen the setup that was in my 84.

 

http://www.outcasthorizon.com/auto/image/radiokit.jpg

 

as you can see it looked ok but it could have been better. Ive now got a design that will look very clean and securely hold a stereo and have room for gages or anything you may wish to add.

 

The plate is held in place with either screws or rivits to the stock radio side brackets. You will need to drill the holes for these screws/rivits in your brackets. Templates will be included for doing this. It will also be possible to bend the tabs around the stock plastic but you run the risk of breaking the 17-23 year old plastic. You will also need to shave some plastic off of the top inside lip of the shifter bezel. This is easily done with a file or grinder. Once the part is installed it will leave a totally clean look with no visible fasteners. It also being metal it will make it more difficult for a radio to be ripped out.

 

http://www.outcasthorizon.com/auto/image/a187/a187radio0.jpg

http://www.outcasthorizon.com/auto/image/a187/a187radio3.jpg

 

These are the 2 options that will be available for order. if you want one with the 3 holes but want them in a different pattern, please get the blank one and custom cut the holes. All you need for this is a properly sized hole saw. I'd love to make custom cut ones but its too complicated to do it at this point. All parts are laser cut from 0.050" 6061 T6 Aluminum and will come in a brushed aluminum finish.

 

A minimum of 10 are needed for each part for an order to be placed. if less then 10 are ordered of one (lets say only 3 people want one with the 3 holes) the all names will move to the non-holed one and cost will be adjusted.

 

Payment due by November 24 once the total number of people wanting one has been listed up. After the order is placed it will take 10-14 days for the shop to cut and ship out the parts to me.

 

Cost: No holes

10 = $25 Shipped (inside US including Hawaii and Alaska)

20 = $22 Shipped

30 = $20 Shipped

 

Cost: 3 holes

10 = $26 Shipped (inside US including Hawaii and Alaska)

20 = $23 Shipped

30 = $21 Shipped

 

For orders outside of the US please add an extra $10 for shipping.

 

GP will run until Noveber 24 at which point payment will be due.

 

Green = Paid

Blue = Shipped

 

no holes:

1. OutcastZeroOne

2. Sully (SQC)

3. Star_V8_Quest (SQC)

4. Star_V8_Quest (SQC)

5. Rusky (SQC)

6. John86TSi (SQC)

7. John86TSi (SQC)

8. 831Starion (SQC)

9. RF600 (SQC)

10. Kenmarrow

 

3 holes

1. Import Warrior (SQC)

2. Cotton (SQC)

3. DEVILStarion (SQC)

4. G54Bstore (G54B)

5. 83TechMaster (SQC)

6. WickedTSI (SQC)

7. Wasabii (SQC)

8. sittin-sideways (SQC)

9. John86TSi (SQC)

10. slow_down (SQC)

11. by_reQUEST

12. md10 (tri)

13. Chiplee

14. DasGunner

15.

 

To Pay:

http://www.outcasthorizon.com/auto/a187radio.html

 

Yes, i am doing this across as much of the starquest online comunity as I posibly can reach but no *DM. im stll banned there so that little section of the world is out of my reach

[Sully]

Order List:

No Holes

1. Sully

2.

3.

4.

5.

 

3 Holes

1.

2.

3.

4.

5.

[Star_V8_Quest]

Order List:

No Holes

1. Sully

2. Star_V8_Quest

3. Star_V8_Quest

4.

5.

 

3 Holes

1.

2.

3.

4.

5.

[importwarrior]

3 holes please.

 

do you take paypal?

 

have you tested it to see if the 3 hoes can fit the gauges with no problems?

 

thanks.

 

 

 

Order List:

No Holes

1. Sully

2. Star_V8_Quest

3. Star_V8_Quest

4.

5.

 

3 Holes

1. importwarrior

2.

3.

4.

5.

[Cotton]

Order List:

No Holes

1. Sully

2. Star_V8_Quest

3. Star_V8_Quest

4.

5.

 

3 Holes

1. importwarrior

2. Cotton

3.

4.

5.

[importwarrior]

thanks! let me know how much total shipped and i will send it ASAP.

 

IW,

[DEVILStarion]

i'm in!

 

3 holes

1. Import Warrior

2. Cotton

3. devilstarion

4.

5.

6.

7.

8.

9.

10.

[Sully]

I didn't see one up there earlier. My bad.

[83TechMaster]

I'm in, I'll take a 3 hole one

[WickedTSI]

put me down for a 3 hole 8)

[heefner]

What about 3 rectangular holes for the guys with a relocated HVAC control and keep the bottom pocket? Just another idea for the no holes guys.

 

IE

 

http://www.26liter.us/gallery/albums/userpics/10088/IMG_2203.JPG

[heefner]

That was my point, I was trying to offer another suggestion. :wink:

[wasabii]

Put me down for a 3 hole design.

 

I'll pick it up at our next meet in Monterrey.

 

Mitchell.

[sittin-sideways]

I am in on this

put my name on the list please

for 3 holes. :twisted:

 

ya more people should sign up.

[Rusky]

put me down for a no holes one

[John86TSi]

Ok, ok, you talked me into it!!!!!! Put me on the list for two no-hole panels and one three hole panel.

 

Thanks

 

John86TSi

[83TechMaster]

do you have a paypal account we can send the money to?

[831starion]

you got mail

[Hit_N_Run-player]

do you make these? I was curious how exactly you cut them so perfectly? PM me!

[RF600]

Please add me for 1 with no holes.

[slow_down]

Can you add me to the list for one with 3 holes? Also would I be able to pay you by money order, my pay pal accout has been messing up latly.

Thanks,

J.H.

[by_reQUEST]

I will take one with 3 holes please

[chiplee]

I'd take one with three holes but it's gotta' be cut for the smaller gauges. If you already said that it was or wasn't I missed it. I think it's 1 7/8ths

[importwarrior]

whens the money due?

[slow_down]

Can you pm me with your home address so I can send you that money order?

J.H.