gofastredstar Posted April 28, 2006 Report Share Posted April 28, 2006 squall...the adjustable timing gear is a benefit to any cam...your stock cam can be off as much as 10 degrees or so...shelby showed us that years ago. 1 or 2 degrees of cam timing can be a huge difference in hp/tq..it gives you the benefit of altering your peak power per rpm as well. How do you know, got to degree it? Quote Link to comment Share on other sites More sharing options...
artinist Posted April 28, 2006 Report Share Posted April 28, 2006 degreeing a cam is the biggest waste of time and just dumb. who says where the cam is supposed to be in the first place. there is only one way to adjust a cam and its to put the car on the dyno and move the cam to different locations to see what give the best results. Quote Link to comment Share on other sites More sharing options...
Kellydahman Posted April 29, 2006 Report Share Posted April 29, 2006 Very nice work.. I will be sending my customers to you as needed. Chris Viper will be getting in touch with you soon about one. Also the current engine we are rebuilding will be needing one. Thanks for supporting the Starquest community by providing after market produsts that are American Made and Labor as well.We used an adj cam gear here....http://img204.imageshack.us/img204/6034/sspx04012sm.th.jpg Quote Link to comment Share on other sites More sharing options...
BORICUAQUEST87TSI Posted April 30, 2006 Report Share Posted April 30, 2006 STILL AVAILABLES? Quote Link to comment Share on other sites More sharing options...
stvblk1 Posted April 30, 2006 Report Share Posted April 30, 2006 Money Sent,Thanks Steve Quote Link to comment Share on other sites More sharing options...
BORICUAQUEST87TSI Posted April 30, 2006 Report Share Posted April 30, 2006 ANI LEFT? :?: Quote Link to comment Share on other sites More sharing options...
Highly Boosted Posted May 1, 2006 Report Share Posted May 1, 2006 bump for any left Quote Link to comment Share on other sites More sharing options...
pagemo Posted May 1, 2006 Author Report Share Posted May 1, 2006 Yes there are 9 out of the 18 total left. I got the bill from my machine shop and to say the least these will be the last for this price. They called this weekend and due to the casting differences it takes a good deal of time to custom fit each piece. At any rate I will sell the rest at this price but in the event any more are made I would have to adjust the price or make them myself which is a issue of having the time to complete them I guess it just depends on the demand.Let me know if you need one... but it is first come first serve as payment is received because I need to recoup my investment as quickly as possible.Scott I received several payments this week end and they will ship today thanks. Quote Link to comment Share on other sites More sharing options...
Kellydahman Posted May 1, 2006 Report Share Posted May 1, 2006 Thanks, and keep up the great work. Quote Link to comment Share on other sites More sharing options...
pagemo Posted May 3, 2006 Author Report Share Posted May 3, 2006 Here is the gears with timing marks, I had to machine these as I did not have time to use our laser (it is busy with actual company work )any way please note there is some casting marks left on some of these around the center section this is just imperfections in the original casting and we did not want to take away excess material to remove this just for looks. The timing marks are 2 deg so spliting each would be a 1 deg adjustment.http://2.6liter.com/userfiles/pagemo/timing%20(2).jpg Quote Link to comment Share on other sites More sharing options...
stvblk1 Posted May 8, 2006 Report Share Posted May 8, 2006 Received gear Saturday. Looks really good. Thanks for the quick service.Steve Quote Link to comment Share on other sites More sharing options...
pagemo Posted May 12, 2006 Author Report Share Posted May 12, 2006 Bump, I have 7 left! Quote Link to comment Share on other sites More sharing options...
pagemo Posted May 18, 2006 Author Report Share Posted May 18, 2006 Bump Quote Link to comment Share on other sites More sharing options...
Lives4Speed Posted May 20, 2006 Report Share Posted May 20, 2006 Received mine in the mail. (ebay purchase) VERY VERY Nice!! Thank you,L4S Quote Link to comment Share on other sites More sharing options...
Boosted_One Posted May 20, 2006 Report Share Posted May 20, 2006 degreeing a cam is the biggest waste of time and just dumb. who says where the cam is supposed to be in the first place. What??? Degreeing is not any sort of waste. Have you ever done a cam and see the results Art? You need to get your cam centerlined and in time so you know where your at. The cam card tells you where your ZERO point is and when the valves open and close. I suppose timing a distributor is a waste too?? Throw it on a dyno and set it?? :? Quote Link to comment Share on other sites More sharing options...
MrBoost Posted May 26, 2006 Report Share Posted May 26, 2006 Got mine today, looks great, can't wait to get it on the car and get some dyno time. ~Tony Quote Link to comment Share on other sites More sharing options...
pagemo Posted June 1, 2006 Author Report Share Posted June 1, 2006 Bump. I have 3 with out timing marks and 2 with the timing marks ready to ship.Scott Quote Link to comment Share on other sites More sharing options...
pagemo Posted June 1, 2006 Author Report Share Posted June 1, 2006 I will also consider trades or partial trades ect. for any other performance items or items of intrest? so let me know.Scott Quote Link to comment Share on other sites More sharing options...
kfitts Posted November 30, 2006 Report Share Posted November 30, 2006 Are you still making and selling these? Quote Link to comment Share on other sites More sharing options...
Lidoidol Posted December 1, 2006 Report Share Posted December 1, 2006 I want one with the timing marks pm me your paypal info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.