stvblk1

I need the cover for the instrument cluster. Not sure what you would call it. Needs to be black, but will take any color. Needs to be in good shape. Any help would greatly be appreciated.....Steve

Send me your email address. Sorry about the size.

[The water sensor and the coolant were attached to the water intake tube on the engine side on the thermostat.

If you want to see what the thermostat looks like off the car, go to summit racing and look up Meziere products.

It will be the weekend before I can have them.

I used a Meziere Enterprise inline thermostat housing. I had a AN Fitting welded on for Turbo coolant line. I hated the one FIP sent with the intake.

Need the metal piece that covers the relays on the left front fender. Thanks

I need the trim peice that goes across the top of the windshield. Thanks

I need the two front hubs for a Conquest. 87 Thru 89. Don't need the bearings,just the hubs. Thanks Steve

Mstieg Payment sent.Thanks for the quick reply. Steve

Please send me your information on how I can pay you. Stvblk10@aol.com. Thanks Steve

I need the peice that goes around the radio. It fit's into that peice that you have. Thanks for your response.

Need a radio bezel for a 87 thru 89, that is in good shape.

This is one of the best times I have had in a Starquest. This would be a great meet in late fall,when the temperature is coming down. Keep this meet going. Steve

Blake and I will be there this year.Room is booked.Be like old times except we'll only have one car. Be good to see everyone... Steve 1. UlrichWolf (Tim) X - Room 218 2. helrazr70 (Chris) X - Room 211 3. Ken_B. (Ken) X - Room 211 4. tim si X 5. carguygibby (Colin) X 6. ScooterDude92(Curt) X 7. pure_insanity (Grant) X 8. 87Blue_Beast (James) X 9. 19cturbo (Mike or Mikie, depends on who you ask) X 10 Tman(Tom) jewelz76 (misty) X 11. BoostedQuest89 (CHAD) X 12. NudeLobster (Justin) X 13. Dred_85.5_TSI (Derrick) X 14. psu_Crash (Mike) X 15. Komeuppance (-Robert) X 16. half&half (paul)X 17. Frenchi934 (Tyler) X 18. MiniSRT4 (Mike) X 19. HotrodTSi (Terry) X 20. Tboost (Torrius) X 21. Intercooledflatty (Harry) X Room 114 pool side, same as last few years 22. Flatbroke313(Jason)X 23. Tripp25 (Tripp) X 24. PDodson (PDawg)X 25. SlowQuest (Larry) XXX 26. Matrapp (Mike) X 27. Kenmarrow ( Ken) X 28. TSIGAL X 29. Coke (Justin) X, maybe XX 30. ImportWarrior (Rob) X, maybe none. 31. JAinsworth (Jimmy) 32. convette 33 1/3. Austin88ESiR (Luis)X 34. bigjohns87 (John) X Room 222 35. IRONSIDE (Perry and family) X maybe XX 36. DAD ( Randy) X 37. Coldscrip (Bill) X 38. stvblk1 (Steve and Blake)X

Not to change the subject,but what ever happened to Tom Metz?He's from the St.Louis area.I met him at the 2004 PF meet. He used to come on this site,but I haven't seen him on for a long time.He had a really nice Conquest. Steve

I had the alternator on an 87. It has very low mileage on it. I went with a bigger amp alternator. Steve

TRACK BEAST Reply sent.

For Sale: Wide Body Mud Flaps. Good Shape for their age. Small tear on right rear and left rear 160.00 Shipped SOLD Accel Hi-Temp Spiral Core 8mm Spark Plug Wires 4 are used and 4are new just add ends 30.00 Shipped Used Mallory Pro Master Coil (Part # 29440) with used 8mm Fiber-Glass Protective Wires 50.00 Shipped Factory Alternator Used Little 35.00 Shipped

This is the thermostat housing that I am running.Its also the best price for an inline thermostat. As far as the temp sensor,I cut the stock sensor out of the stock intake manifold and shape it to fit the aluminum tube and then had it welded into the Hurricane intake,right below the throttle body.Close to the inside,by the intake flange. Also had the AC cut-off sensor welded beside it. I also had a 6an fitting welded to the inline thermostat on the radiator side for the turbo coolant feed. That's one of the things,I don't like about the Hurricane. No thermostat housing built on the intake. Let me know and I will send you some pictures of how I did it You can get this at Summitracing. Meziere Enterprises WN0072 - Meziere Inline Thermostat Assemblies Thermostat Housing, Billet Aluminum, Straight Up, Universal, Each Part Number: MEZ-WN0072

1988 Conquest SHP in Memphis Tn. Car is mostly stock. No engine mods. 5speed,Black interior,87 Front seats,all interior is in good shape. Paint is decent except for the right front fender.Needs repainting.Right rear quarter is dented below crease,nothing major.A few door pings.A few little dents on the front of the fenders. Air dam in good shape.Tires are decent.Has the 8's and 9's and the adjustable shocks.The guy made the muffler for it,looks different. Also has 2 87 Conquests.One Conquest is a complete car with a clear title. Car has been setting for awhile. White with Burgandy interior. 5 speed. No details on the car.The other Conquest is mostly a parts car.The car originaly had 71,000 miles on it. Automatic also. $3500. for all 3. Call me or e-mail me if interested if more pictures are required. Thanks Steve 901-490-2823 jv351@bellsouth.net

I found the box that they were shipped in. They were shipped from you, when you were in Florida. Thanks for the reply. Thanks Steve

Send me your info. Thanks Steve