BaltTSI Posted March 16, 2005 Report Share Posted March 16, 2005 The IAV-1 display...would this be the same thing as using a laptop to tune it?. And whats the time line looking like to get my setup, I sent the money Tuesday the 15th. Not that I'm in any big hurry. Rob Quote Link to comment Share on other sites More sharing options...
hackerace Posted March 16, 2005 Author Report Share Posted March 16, 2005 The IAV-1 display will allow you to tune the system. I am supposed to be getting one soon but since I have not seen the unit I can't give you first hand experience. Let me find out the details around the capabilities of this and I will get back to you. I will also post a shipping schedule just as soon as I can get one! BTW, I just put a cold-air intake from a 89 Prelude on my Quest with a home made cold air box to keep engine heat out of the intake. The sound it makes when I spool up the turbo really turns some heads. Not having a MAS airflow sensor on the intake gives lots of flexibility! Quote Link to comment Share on other sites More sharing options...
BaltTSI Posted March 17, 2005 Report Share Posted March 17, 2005 Sounds good, and I love that jet sound the turbo makes ;D Quote Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted March 18, 2005 Report Share Posted March 18, 2005 So, what's that make, 4 people have paid? Me BaltTsi SubStock Slydogg ??? Quote Link to comment Share on other sites More sharing options...
hackerace Posted March 18, 2005 Author Report Share Posted March 18, 2005 I'm sure that there are at least five people! I will have the list soon. Some folkes have paid via a check and it takes a couple of days for those to arrive. I asked for everyone to send me an email if they have paid and some people did, some people did not. Quote Link to comment Share on other sites More sharing options...
slydogg Posted March 18, 2005 Report Share Posted March 18, 2005 I e-mailed Sly Quote Link to comment Share on other sites More sharing options...
substock Posted March 18, 2005 Report Share Posted March 18, 2005 i paid, emailed, and have been found wanting ;D. can't wait to get it Quote Link to comment Share on other sites More sharing options...
G54Bstore Posted March 20, 2005 Report Share Posted March 20, 2005 i was going to join this group buy but i need the TB-PRO 1. Quote Link to comment Share on other sites More sharing options...
charlie31603 Posted March 21, 2005 Report Share Posted March 21, 2005 If you guys still need a 5th one for the discount I will do it on the third of next month when I get paid. Just let me know. I plan on buying one then anyways. Adam :-) Quote Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted March 28, 2005 Report Share Posted March 28, 2005 What's the deal with this? I don't wanna find a package on my doorstep unannounced.. ;D Actually, I would.. But still, what's going on with this? Quote Link to comment Share on other sites More sharing options...
substock Posted March 28, 2005 Report Share Posted March 28, 2005 What's the deal with this? I don't wanna find a package on my doorstep unannounced.. ;D Actually, I would.. But still, what's going on with this? you and me both, i'd like to know how much longer for this. i was told it would take roughly 4 weeks for mine, i sent money on the first of march so hopefully mine will be here real soon Quote Link to comment Share on other sites More sharing options...
slydogg Posted March 28, 2005 Report Share Posted March 28, 2005 and Sly makes three? Quote Link to comment Share on other sites More sharing options...
hackerace Posted March 29, 2005 Author Report Share Posted March 29, 2005 It is official... five people have paid and the discount is 5% The units will start shipping real soon. For those of you who still want a unit but could not participate this time I'll setup another GP later in the summer. Aloha from Maui (it's a tough life) Quote Link to comment Share on other sites More sharing options...
FuelinjectionPro Posted March 29, 2005 Report Share Posted March 29, 2005 Thanks to HACKERACE for putting this group buy together. We have received payment from five for this group buy on the TB-PRO2. They are in the order payment was received: (1) Jesse (not sure of his club name) (2) Substock (3) Justpaus_88TSI (4) Slydogg (5) BALTtsi Kits will ship in this order, starting next week. Our normal lead time is about four weeks. We will send tracking numbers to you. As a bonus this group will be receiving the new TB-PRO2R kit which includes our new FC-1S controller and the new PROR2 fuel rail. Thank for using our products, ED FuelinjectionPro.com Quote Link to comment Share on other sites More sharing options...
substock Posted March 29, 2005 Report Share Posted March 29, 2005 thanks for the update Ed, can't wait to get it. Quote Link to comment Share on other sites More sharing options...
slydogg Posted March 29, 2005 Report Share Posted March 29, 2005 much thanks Ed, i can't wait to pass substock on i-81, hehe Sly Quote Link to comment Share on other sites More sharing options...
substock Posted March 29, 2005 Report Share Posted March 29, 2005 much thanks Ed, i can't wait to pass substock on i-81, hehe Sly too bad were on almost the opposite end of the states(i'm outside pittsburgh). you'll have to keep up with my new motor ;D Quote Link to comment Share on other sites More sharing options...
slydogg Posted March 29, 2005 Report Share Posted March 29, 2005 Hey substock, your'e only 3, 4 hrs, turnpike travel to shippensburg, hope you can make it to the carlisle meet in july take care Sly Quote Link to comment Share on other sites More sharing options...
substock Posted April 6, 2005 Report Share Posted April 6, 2005 so are we going to get any type of notice that its been sent out?? my motor is done and this is all i need to have to be able to start my car up Quote Link to comment Share on other sites More sharing options...
FuelinjectionPro Posted April 6, 2005 Report Share Posted April 6, 2005 Thanks to HACKERACE for putting this group buy together. We have received payment from five for this group buy on the TB-PRO2. Â They are in the order payment was received: (1) Jesse (not sure of his club name) (2) Substock (3) Justpaus_88TSI (4) Slydogg (5) BALTtsi Kits will ship in this order, starting next week. Our normal lead time is about four weeks. We will send tracking numbers to you. As a bonus this group will be receiving the new TB-PRO2R kit which includes our new FC-1S controller and the new PROR2 fuel rail. Thank for using our products, ED FuelinjectionPro.com Yes, we will send you a note to let you know when your kit is to arrive and the tracting number. Kits will start arriving next week and will be shipped in the order above. ED FuelinjectionPro.com Quote Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted April 7, 2005 Report Share Posted April 7, 2005 Sweet! Quote Link to comment Share on other sites More sharing options...
substock Posted April 7, 2005 Report Share Posted April 7, 2005 Sweet! my thoughts exactly, can't wait to see the box at my house when it gets here Quote Link to comment Share on other sites More sharing options...
BaltTSI Posted April 8, 2005 Report Share Posted April 8, 2005 I downloaded the printable install manual and was reading it, it's looks pretty easy, but it doesn't say anything about removing the MAS, we can right? And in replacing the temp sensor....is that the one that runs the temp gauge or what? Quote Link to comment Share on other sites More sharing options...
substock Posted April 8, 2005 Report Share Posted April 8, 2005 I downloaded the printable install manual and was reading it, it's looks pretty easy, but it doesn't say anything about removing the MAS, we can right? And in replacing the temp sensor....is that the one that runs the temp gauge or what? you do remove the mas and replace it with the map sensor. for the air temp sensor, you drill a hole in the ovcp(probably the closer to the intake inlet the better) and place the air temp sensor in the hole(like this): http://www.angelfire.com/mech/edwardcase00/tb2_instal2_files/image006.jpg i do not believe you take any of the sensors off of your intake. the air temp sensor(like on my syclone that ran the FAST/speedpro setup) is read by the ecu to display the temp. that is going into the intake. hope this helps some and you understand what i'm saying Quote Link to comment Share on other sites More sharing options...
hackerace Posted April 8, 2005 Author Report Share Posted April 8, 2005 Yes, the MAS is no longer necessary! I installed a cold air intake from an 89 Prelude and built a custom air box to keep engine heat out. It sounds really cool... like a jet taking off. It really turns heads when the turbo spools up! The installation is very easy and help is only a phone call away! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.