Chino710 Posted October 6, 2023 Report Share Posted October 6, 2023 Need a fuel level sending unit mine cannot be saved. Would also take the fuel pick up unit but mainly need the sending unit. TIA Quote Link to comment Share on other sites More sharing options...
tux Posted October 6, 2023 Report Share Posted October 6, 2023 Check this https://www.starquestclub.com/forum/index.php?/forums/topic/150375-holley-floatless-fuel-level-sender/ Quote Link to comment Share on other sites More sharing options...
Chino710 Posted October 7, 2023 Author Report Share Posted October 7, 2023 19 hours ago, tux said: Check this https://www.starquestclub.com/forum/index.php?/forums/topic/150375-holley-floatless-fuel-level-sender/ Awesome I think I’m gonna try this out Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted October 10, 2023 Report Share Posted October 10, 2023 On 10/7/2023 at 11:03 AM, Chino710 said: Awesome I think I’m gonna try this out Please report back if you install this level sensor. I also think it is a great idea! Quote Link to comment Share on other sites More sharing options...
obsolete Posted October 11, 2023 Report Share Posted October 11, 2023 There was a guy in one of the Facebook groups named James Kane who modified a Montero sender to work. Of course, because this is the way Facebook works, all the info appears to have been lost, so I can't tell you how to do it, but it is possible. Quote Link to comment Share on other sites More sharing options...
Chino710 Posted October 13, 2023 Author Report Share Posted October 13, 2023 I just received the unit today it will fit in place of the factory unit but needs different bolts to match the threads on our tanks. The wiring seems simple 3 wires: 12v, ground and gauge. I will let you guys know once I install it currently using a tank sealer kit on my gas tank so it’s probably gonna be a couple weeks Quote Link to comment Share on other sites More sharing options...
Chino710 Posted October 19, 2023 Author Report Share Posted October 19, 2023 I connected the Holley easy level last night had to run a new cable to power the unit since it wasn’t getting enough power. Now that I’m trying to calibrate the gauge as it says in the instructions it seems like the factory gauge cannot read the signal coming from the sender. The output for the sender is Pwm and I believe the factory guage is ohm so this will probably work with a different guage Quote Link to comment Share on other sites More sharing options...
tux Posted October 23, 2023 Report Share Posted October 23, 2023 uf. Not that it will be super easy, but you can translate PWM signals to a variable resistance with an arduino. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.