averse Posted November 1, 2014 Report Share Posted November 1, 2014 I have a near perfect set of windshield cowls on my parts car and every time I go to try to take them off they are on so solid I end up quitting the removal attempt for fear of breaking them into pieces. Anyone have good techniques for removing them without causing chippage or breakage? Link to comment Share on other sites More sharing options...
markhansenconquest Posted November 2, 2014 Report Share Posted November 2, 2014 u need a screw driver or flat piece of metal and pry right next to clips so it doesn't bend cowl.... Link to comment Share on other sites More sharing options...
JAinsworth Posted November 2, 2014 Report Share Posted November 2, 2014 If you break any clips, Dad sells them.Jimmy Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted November 3, 2014 Report Share Posted November 3, 2014 plastic trim remover tool FTW Link to comment Share on other sites More sharing options...
Starfighterpilot Posted November 4, 2014 Report Share Posted November 4, 2014 plastic trim remover tool FTW I might add, the WIDEST non metallic trim remover you can find. Harbor Freight sells 'em cheap. Be carefull that you don't snap the L shaped black plastic cowl retainer under the middle joint between the 2 cowls. Anyone got a picture of it? For What It's Worth. KEN Link to comment Share on other sites More sharing options...
psu_Crash Posted November 4, 2014 Report Share Posted November 4, 2014 I might add, the WIDEST non metallic trim remover you can find. Harbor Freight sells 'em cheap. That's what i have. Works on all sorts of trim without damage Link to comment Share on other sites More sharing options...
JAinsworth Posted November 4, 2014 Report Share Posted November 4, 2014 http://www.enginemachineservice.com/ems/images/parts/conquest/miscellaneous/mb153819.jpg Link to comment Share on other sites More sharing options...
Recommended Posts