Agressivedsm Posted February 10, 2014 Report Share Posted February 10, 2014 so I pulled my engine out of my 88 tsi. went to mount it to an engine stand. obviously had to pull the clutch and flywheel. that's when I noticed the big ford logo on the clutch, im thinking what the hell is this? anyone out there able to clear this up? Link to comment Share on other sites More sharing options...
R-R-Quest Posted February 10, 2014 Report Share Posted February 10, 2014 Pics? Part Number stamping? Link to comment Share on other sites More sharing options...
Agressivedsm Posted February 10, 2014 Author Report Share Posted February 10, 2014 I ll post a pic in a couple hours when I get off work. Link to comment Share on other sites More sharing options...
TexasQuest Posted February 11, 2014 Report Share Posted February 11, 2014 Never heard of a ford clutch working on our cars. Have heard of a mazda rx7 working though. Link to comment Share on other sites More sharing options...
Agressivedsm Posted February 13, 2014 Author Report Share Posted February 13, 2014 Need to get back out there. The pressure plate was a mitsu but the disc had a ford stamp on it Link to comment Share on other sites More sharing options...
JohnnyWadd Posted February 13, 2014 Report Share Posted February 13, 2014 I have seen that too its from a mazda cross reference like the b2600 truck or something Link to comment Share on other sites More sharing options...
TexasQuest Posted February 14, 2014 Report Share Posted February 14, 2014 That makes sense. Never thought of the mazda b-series that also shares ford stuff......... Link to comment Share on other sites More sharing options...
techboy Posted February 14, 2014 Report Share Posted February 14, 2014 (edited) That makes sense to me too. When I did my motor build and went to install my clutch I realized that I had forgotten to purchase an alignment tool. I went digging through my toolbox and discovered that the alignment tool from my old 97 Ford Ranger fit!! I never thought too much of it since then till tonight. Edited February 14, 2014 by techboy Link to comment Share on other sites More sharing options...
Recommended Posts