Foreverzero Posted February 16, 2012 Report Share Posted February 16, 2012 (edited) The piping was all fabricated by the owner of 417 Motorsports here in town. The name might not be recognized very easily by most on here but the shop is very well known in the LSX community. They've had several Hot Rod magazine cover cars in the last few years. The piping is all (2.25") mandrel-bent and tig-welded aluminum. The couplers are black 3-ply silicone, and the clamps are all T-Bolt. NOT worm-clamps! This is a BOLT ON setup. Your compressor housing just needs to be clocked downward to accommodate the shorter piping route. I've attached a couple pics to illustrate the short piping route in case anyone is curious. I'm including the intercooler with the sale as the inlet and outlet pipes are welded to it. The factory IC inlet and outlet were enlarged to accompany the piping (no bottlenecks here ). The blow off valve flange will fit any HKS model. $210 OBO Shipped To Your Door via FedEx with insurance and tracking information!! Edited February 22, 2012 by Foreverzero Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 16, 2012 Author Report Share Posted February 16, 2012 (edited) Here's a link to a pic of how the piping looks completely installed: http://s1181.photobucket.com/albums/x430/wp0170171/Starion%20-%20Post%20Wreck/?action=view¤t=041.jpg Edited February 16, 2012 by Foreverzero Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 16, 2012 Author Report Share Posted February 16, 2012 Bump, Price lowered to 325! Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 19, 2012 Author Report Share Posted February 19, 2012 Bump, Dropped the price down to 275 OBO! I reallyneed to get this sold asap! PM me or feel free to text me: four 1 seven - five 9 seven - two 6 nine seven Quote Link to comment Share on other sites More sharing options...
BOHO Posted February 19, 2012 Report Share Posted February 19, 2012 Looks like a good kit. Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 20, 2012 Author Report Share Posted February 20, 2012 Looks like a good kit. Thanks yeah I liked it a lot. Am I way off base on the price? I was under the impression *DM kits went for far more than this without the intercooler. There's been no interest thus far .. Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 22, 2012 Author Report Share Posted February 22, 2012 Back to the top. Somebody must need a quality hard piping kit. I'm open to any reasonable offer, I just need to get this sold quickly! It's not doing me any good just sitting on my table... Quote Link to comment Share on other sites More sharing options...
joey_crandall Posted February 22, 2012 Report Share Posted February 22, 2012 (edited) is it for an 86? it looks like theres an IAT sensor in the top near the TB? if so need any stock parts? i got just about everything you need to put your car back together other than the fender Edited February 22, 2012 by joey_crandall Quote Link to comment Share on other sites More sharing options...
BOHO Posted February 22, 2012 Report Share Posted February 22, 2012 Don't go any lower on your price...I wouldn't take lower than 250 for this kit. Quote Link to comment Share on other sites More sharing options...
leesfer Posted February 22, 2012 Report Share Posted February 22, 2012 Don't go any lower on your price...I wouldn't take lower than 250 for this kit. Agreed... it just takes time to sell things on this forum, since most people have what they need you have to wait until new builds are being started Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 22, 2012 Author Report Share Posted February 22, 2012 is it for an 86? it looks like theres an IAT sensor in the top near the TB? if so need any stock parts? i got just about everything you need to put your car back together other than the fender It was originally for an 86 but I had the ovcp redone to not have the IAT sensor bung in it since most owners don't have 86's. The car is far beyond fixing for me. If I get another Starion, I'd like to start fresh. Thanks tho Don't go any lower on your price...I wouldn't take lower than 250 for this kit. Yeah I'm gonna hold on this price for a bit and see if it generates any interest Quote Link to comment Share on other sites More sharing options...
Foreverzero Posted February 23, 2012 Author Report Share Posted February 23, 2012 Sold! Mods feel free to lock and delete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.