Foreverzero

I sincerely apologize. I got so many PM's, texts, calls, and replys that I had a hard time keeping track of who's who and who wanted what. Especially when a couple buyers backed out then I hard a tougher time remembering who was next in line and notifying them . You've got a PM. I'm headed up to FedEx tomorrow to ship out several items so I'll check what the shipping cost on the panels would be. Or just one if need be. Luckily enough, the purchaser of the manual seatbelt setup didn't want/need the door panels so I've still got a pair sitting around. I'll PM you tomorrow afternoon To anyone else with any inquiries, my phone is by far the best way to get a hold of me as work keeps me away from my desktop often times. The bold listed parts on the original post are all still available!! Thanks, Cameron 417-five nine 7- 2 six 9 seven

You're first in line for both the air dam and the belt setup and I'd definitely like to save a bit on shipping by combining. I texted the approximate shipping cost to you. Let me know if you're still interested You're first in line on the wheel. I got your text and just sent you one back. PM'ed you back. Thanks Pm'ed you back. Thanks You're first in line on the HVAC controls. Yep I still have the wiper arms and they're both in very good shape. I uploaded a pic of them to my photobucket for you so you can see for yourself. If you want the arms and hvac controls I'd do it for 45 shipped. I'll even throw in the 1 piece Anco Contour blades on them. Those were 15 bucks a piece : / You're first in line for the timer/harness. The price is the same as listed above to 46225. Let me know if you're still interested and I'll get the paypal info out to you. PM'ed you back. Thanks To the others interested (Red Baron, 19red88quest, Dshaff36), you're all next in line on the parts you specified. If for any reason the buyers who posted interest first fall through then I'll let you know immediately.

A couple notes I feel obligated to put up. The paint on the air dam was damaged in the engine bay fire but the integrity of the Air Dam intself is just fine. Probably doesn't concern most on here as they'll have to paint it to match their car anyway but I just wanted that known. http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0508.jpg?t=1332822110 A couple of the mounting holes for the center console became brittle and partially cracked so the simple solution I found was to just use washers over the factory mounting screws. Pics will probably explain it better than I can so here's what I mean. http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0495.jpg?t=1332821837 Again, more pics can be found on my photobucket here: http://s1181.photobucket.com/albums/x430/wp0170171/

Well I'm pulling the last few things off the car before I send it to the crusher. I've only been pulling the things that I think have a high likelihood of selling but if theres a part you are looking for that you don't see listed here, please feel free to PM and I might be able to accomodate you. All these parts came off my 86 daily driver. All interior bits are black and are in good shape. Any minor defects, I tried to take detailed pics of. All prices are SHIPPED Except for the manual seat belt setup as I'll need to get a quote from FedEx as to how much it will be to ship but know that I am quite willing to ship if need be. All pics can be found on my photobucket here: http://s1181.photobu...x430/wp0170171/ Complete 1986 Manual Seatbelt Setup (Seatbelts and Spools, Buckles, Door Panels, A-pillars, Very Clean Black Carpet, Console, Coin Tray, etc. *** $200 SOLD! OEM Leather Wrapped Mitsubishi Lancer EVO II Momo Steering Wheel PLUS Boss Bolt-On Hub $150 http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0482.jpg?t=1332821598 Greddy 1.5 Bar Boost Gauge $50! http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0489.jpg?t=1332821738 Black mid-90s HKS Turbo Timer WITH Plug and Play Harness $35 SOLD! Black Face HVAC Control Panel w/ trim $25 SOLD! OEM power mirrors (Rio Red) $45 http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0479.jpg?t=1332821531 Pair of Turbo Door Handles $75 SOLD! Cross-Drilled / Slotted Rotors for Front and Rear (Maybe 1k miles on them) $80 SOLD! Clean 1-Piece Air Dam $120 SOLD! 25mm Billet Aluminum Spacers (Hub+Wheel centric for Starquests!) (Maybe 1k miles on them) $30 http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0484.jpg?t=1332821618 *** The only thing you'll have to source is a headliner as the first owner of the car installed an aftermarket sunroof which plants a big hole right in the center of the headliner Work keeps me pretty busy so I haven't pulled the fenders or hatch or other misc oem parts that I'm not sure will generate much interest with all the parts cars on here, but again if you need something please don't hesitate to ask. Thanks, Cameron 417-five nine 7- 2 six 9 seven

Sold! Mods feel free to lock and delete

It was originally for an 86 but I had the ovcp redone to not have the IAT sensor bung in it since most owners don't have 86's. The car is far beyond fixing for me. If I get another Starion, I'd like to start fresh. Thanks tho Yeah I'm gonna hold on this price for a bit and see if it generates any interest

Back to the top. Somebody must need a quality hard piping kit. I'm open to any reasonable offer, I just need to get this sold quickly! It's not doing me any good just sitting on my table...

Thanks yeah I liked it a lot. Am I way off base on the price? I was under the impression *DM kits went for far more than this without the intercooler. There's been no interest thus far ..

Bump, Dropped the price down to 275 OBO! I reallyneed to get this sold asap! PM me or feel free to text me: four 1 seven - five 9 seven - two 6 nine seven

Bump, Price lowered to 325!

Here's a link to a pic of how the piping looks completely installed: http://s1181.photobucket.com/albums/x430/wp0170171/Starion%20-%20Post%20Wreck/?action=view&current=041.jpg

The piping was all fabricated by the owner of 417 Motorsports here in town. The name might not be recognized very easily by most on here but the shop is very well known in the LSX community. They've had several Hot Rod magazine cover cars in the last few years. The piping is all (2.25") mandrel-bent and tig-welded aluminum. The couplers are black 3-ply silicone, and the clamps are all T-Bolt. NOT worm-clamps! This is a BOLT ON setup. Your compressor housing just needs to be clocked downward to accommodate the shorter piping route. I've attached a couple pics to illustrate the short piping route in case anyone is curious. I'm including the intercooler with the sale as the inlet and outlet pipes are welded to it. The factory IC inlet and outlet were enlarged to accompany the piping (no bottlenecks here ). The blow off valve flange will fit any HKS model. $210 OBO Shipped To Your Door via FedEx with insurance and tracking information!!

*UPDATE, See Original Post Above* Sorry to all who I've taken so long to get back to. I've been putting in insane hours at work and hadn't had much time to get all the parts pulled and cleaned up. However, the Exhaust, Manifold, Turbo, Blanket, IC piping, and Intercooler have all been pulled and cleaned up a bit. I snapped a few quick pics from my phone of everything as it sits and uploaded them to my photobucket. You can see the new stuff here: http://s1181.photobu...x430/wp0170171/ All parts are ready to go except for the intercooler setup! The ovcp got a little knackered when the car was totalled, so I'm having 417 Motorsports make me a brand new exact copy of the old one. That pipe will be finished and the IC setup will be ready to ship out by Thursday the 9th. It will still have the same hks aluminum bov flange installed for the next buyer. Now, because I'm having a brand new ovcp custom made to complete this setup (out of my own pocket, that I'm not going to even see use from), I've raised the price for the intercooler setup to $380. I'm still going to take a loss on it but at least it won't be as bad of a loss. Additionally, you can see in the pics that one of the studs on the exhaust manifold snapped while I was removing it. As a result, I'm lowering the price of it to $45 shipped. These two price changes have been adjusted for in the original post above. I'm going to make a new thread in the very near future for all those interested in additional parts like the door handles, manual seat belts, etc. I kinda want to keep this thread about the big main performance parts listed above. Make no mistake, all this stuff will be available but I just need to get this big stuff out of the way first. Sorry man, I'm already taking a huge loss on all these parts. I really can't afford to drop the prices any lower, or do bulk buy discounts. The rotors and pads are the "Brake Labs" package you can buy off eBay. They have maybe a thousand miles on them if that.

Replied to all PM's. Anyone with previous inquiries, check your inbox As promised, heres a link to my photobucket page for some pics of all the parts. All these pictures were taken about a year ago after the the car had gotten into a fight with a guard rail and some rocks. Granted the pics are a little old, but they're still the same parts that are up for grabs currently. http://s1181.photobu...!cpZZ1QQtppZZ20 I'm really pleased that there's been so much interest. Although I've had several offers, I'm hesitant to receive any payment before I've actually gotten out there to pull everything and snap a couple more recent pics. I'd hate for someone to send me payment right now when I wont' be able to pull the parts and get them shipped for a few days. Work keeps me pretty busy but I plan to have the parts pulled and a few new pics taken by Wednesday or Thursday this week. *fingers crossed*

Mods or Admins please lock and delete. Thread got a little cluttered and almost everything was sold.

As far as I'm aware neither JustPaus_88Tsi nor Burton are making their clear fog light lenses anymore and I've been looking for a pair for some time. If anyone has a pair they'd be willing to part with please drop me a pm or post some pics. I'm looking to get a hold of these asap. Thanks for reading! -Zero-

$499 seems pretty steep to me, but I don't think I've ever seen a set of these. http://www.ebay.com/itm/RARE-Starion-Conquest-Turbo-Intercooler-Side-Mouldings-HKS-*DM-Magna-TSi-/180761289369?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2a16366299#ht_752wt_1139

I was digging around on Ebay and stumbled across this. It could use a clean up but still a pretty rare, period correct addition. http://www.ebay.com/itm/RARE-Starion-Conquest-HKS-Intake-Kit-w-HKS-BOV-Turbo-TSi-83-Starion-*DM-/180759611713?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2a161cc941#ht_5840wt_1139

I'm almost speechless, that Fiji is seven kinds of perfection. It's Absolutely gorgeous. The definition of Built Not Bought!

Well I'm all finished wiring up my turbo timer and boost controller except for one thing. The HKS EVC-EZ controller unit requires a power and ground. The ground is easy enough but I'm not sure which wire to tap into for the power. It MUST be a wire that sees power when the electronics turn on, NOT just when the lights come on. The ignition harness/loom right by the steering column is the one I plan to tap into but I'm not sure which wire would be best. If anyone has any ideas, please let me know! Thanks

I really hated the cheap look of a big exposed K&N and no can but the can is pretty restrictive so I went with my own interpretation. After the louvers were finished I had it sandblasted and powdercoated. Turned out pretty decently in the end. http://i1181.photobucket.com/albums/x430/wp0170171/Starion%20-%20Post%20Wreck/016.jpg?t=1306377550

wow that subframe looks fantastic! Bars, bushings, and coil overs, all tied together with that candy violet really works. Sexy

I really can't say enough about this guy. not only did he have all the parts I needed and sold them at am awesome price but drove three hours to come meet me and deliver the parts. He's an outstanding seller and a real asset to the community. Buy with the utmost confidence from him

lol As did I

PM Sent