So I wanted to record something on TV to watch later. I grab a tape and put it in the VCR. Try to rewind several times and it ate the tape several times. Try to rewind manually with a drill and it only goes so far before it wont rewind anymore. Try fast forwarding in the VCR so it can rewind completely and evenly. Now I'm at the end of the tape and can't rewind it. Oh and it ate the tape again when I tried to rewind. 20 minutes of screwing with a tape, my show has started and I can't reco

After a very eventful day of driving 5+hrs we get to the quest that has been sitting for a few months. Look the car over check fluids drop new batt in and she fired right up. Load her on the trailer and drive 5+hrs back home threw Texas big cities and horrible traffic. Well now gotta get the girlfriend to join the forum and start posting.

fuel filler neck coupler hose   http://www.fillernecksupply.com/

Provided by: Mike C.   the wastegate actuator arm is supposed to have some preload. If you can pull on the arm by hand and connect it to the wastegate flapper by hand then you are either a bodybuilder or more likely don't have anywhere near enough preload. Abut 1/8th to 3/16ths of an inch mismatch between the hole in theactuator arm and the pin it's supposed to fit over is a good starting point.   The way I install the wastegate is to use an air compressor with a quality regulator. With the r