Is the torque assembly the same for all widebodies 86-89? for example can i take the torque tube from an 86 and pop it into an 89 and vice versa? and all are the components the same/ interchangable?  extension shaft, companion flange, bearing,  etc   Also, what grease are people using to grease the toque tube and the extension shaft to spline coupler/pinion coupler?

Hi Guys,  I just picked up a 88 Starion 60k miles, red, non running supposedly due to bad fuel pump. Will be going through entire fuel system and replacing parts from MKS. Assuming things go good with repairs I'll be looking to imprive performance from all around. Excited to get it this week and start working on it. Thanks. Ian from Denver 

I hope this doesn't overlap the similar thread but searching for this exact problem was challenging. I took out the modified 87 Conquest on Easter Sunday. My subdivision is kind of hilly and it stalled as I came down a hill and made a sharp left turn (my foot was on the clutch) at low speed. It was just like it was turned off, not like I'd gone too slow in first gear without the clutch depressed. It cranked back up before I'd come to a complete stop. Then, maybe 15 minutes later, it st

https://carsandbids.com/auctions/3OgRYgAz/1989-chrysler-conquest-tsi