Modifying the TBI injector hat. Sorry no before pics.   I still have a fair amount of work to go on this.   Looking on the inside of the hat, there is a bit of material that can stand to be removed to help the flow of air to the TB.   Due to the thickness of the casting being to thin just to grind it out, the outside has to be welded up some.   http://i261.photobucket.com/albums/ii49/BogusSVO/WORK/Starion%20Turbo/DSCF6497.jpg   Now the inside can be ground to the desired shape. http://i261.ph

Modifying a TBI Intake The customer bought a larger throttle body to install, but due to the size of the intake, There will be a minimal improvement in flow with out enlarging the intake bore in the manifold. http://i261.photobucket.com/albums/ii49/BogusSVO/WORK/Starion%20Turbo/DSCF6493.jpg   Stock is appox 1.950   The new TB has a bore of 2.040 http://i261.photobucket.com/albums/ii49/BogusSVO/WORK/Starion%20Turbo/DSCF6507.jpg   I also had to hand cut upper and lower TB gaskets.   There is a ste

I have 89 quest.Do you have the large cooling fan,left and right frount side lights,rear window wiper arm,the grill and the frount lower ground efect. I dont know what that one is called.

my car wont drive past 4000rpm, no matter if i keep holding it or not. it is coming on boost but just wont climb past 4000rpm, any ideas or help?