My car came with a Griffin 1-25222-X universal 2-row radiator in it. Nice looking part, but the PO did a crappy job of mounting it. The lower radiator hose is a problem. The outlet on the radiator is 1.75", and the water pump inlet is only 1.25". The PO used a 1.75" hose that didn't fit properly (rubbed on the power steering pulley) and just cranked the clamp down really hard to make it seal on the much smaller water pump inlet. I'm amazed it even worked.   I've read other threads on this f

So I was using my mitre saw to chop the painted ends off the firewood I got. Cutting through the last piece the saw made a funny noise. I set the last piece aside and pulled the trigger on the saw again to see what was up. The blade slowed way down suddenly, made bad noises, then sparks shot out of the motor and it burst into flames. So I casually unplugged it, opened the garage door and took it outside to watch it burn.   Time for a new saw I guess. At least it finished all the firewood be

Just bought an 87 esi-r a month ago. The teeth on the ring gear are destroyed and i've been looking for a flywheel (affordable) for awhile now with no luck. I heard that the flywheel from a dodge ram 50 was interchangable. I looked it up at oreilly's and its $45 for the ring gear. Problem is i don't know if it'll work. I've been searching the internet for an answer without finding it. The ring gear has 132 teeth. Will it work with a stock starion starter? Sorry about the paragraph but i wanted t

the fitting on the oil filter housing the same as on the top of the turbo???