I am looking for an 88 shp 5spd driver's side harness with interior and exterior relays preferably. I also would like the light harness too that's in the interior and passes from the drivers side to passenger side. I dont need the light controller modules just the harness itself. Let me know if you have one or both harnesses and the price.

Hello I'm new to the forum. My question involves the distributor notches and conflicting info I've been told. To start my distributor has a punch mark on the dizzy near the gear. It also has a line on the dizzy that I assume aligns with the punch hole. Now what I have been told is to just insert the dizzy until the rotor aligns with #1. But I have also been told to align the punch hole with the line on the dizzy, and if I do this I am not near with the rotor to the #1 plug. Any clarification wou

So I have a flatty I am 5 lug swapping. Rear is done attention is on the front.   What I know: -Crossmember has different mounting points from the widebody -Strut Rods, knuckles and Control arms are different.   What I am doing: -Adding D2's -Going to widebody wheels, regular now, possibly SHP in the future. -Doing the rack swap which I already have a set of widebody knuckles modified to fit the 240sx tie rods.   What I want to know: -Should I swap to all widebody stuff:control arms, strut rods?

Knock Box and Oil Cooler Needed