My fuel gauge is doing strange things. I ordered a new one from Japan and it had the seal, but it will not read correctly. I used a paperclip and tested the wires and the gauge works, it goes full and empty with the right wires tripped, but only read a quarter of a tank when connected to the sending unit. Is there another ground some where that will work correctly? It reads ok for a while then runs to a quarter of a tank and will not read correctly. My hatch needs adjustment, if that has anythin

Anyone need a complete roof panel cut off of a shell?

Recently sold mas airflow that came off of my 86 quest(may of 86). Buyer just disputed saying I sent the wrong mas, says I sent one for 87-89. Now I know the mas I sent him was what was on my 86 when I bought it, just curious if you guys have a photo reference or plug ID on the differences so I can determine if I made a mistake unknowingly or if possibly buyer has an 86 that was manufactured after October which would technically be an 87. I don't want to screw anyone and I just want to make sure

Ok John, Starquest Members, I'm starting my "quest" to insanity. I'll just start by giving a ton of credit to all of you here, indebted for the insight and knowledge gained by lurking on the forums. So far, Engine out, the bay is stripped. All the wiring in the car removed. The dash and interior is out. The harnesses are not going back in but I plan to use most of the wiring. For those of you that replaced the factory harness after it was removed, my hat is off to you. Pictures will soon