I was just wondering if you could test a waste gate by putting air pressure to it. I think the front part with two ports is ten psi and you cap one, and you leave the other port towards the back open? has anyone done this before? I was thinking of putting ten psi to the back to make sure it works. Anyone done this? Its on a stock setup.

Hi guys my names Danny, i recently acquired a 1988 conquest here in Pennsylvania. It's not currently running due to the starter going out, needing a new shifter and the vacuum lines were never put back after the engine was rebuilt and put back in the car. I've found the vacuum diagram online but i was just wondering if there was anyone in my area willing to help me put things back together, especially the vacuum lines. The starter i can do myself as well as the shifter but i think i'll need some

Is it possible to hookup the oil separator without plumming into the ahp? It's sucking oil into the mas and stalling the motor. I'm also getting blue smoke on decell. I haven't had a chance to do a leak down check or commpression test yet. The oil is deffinetly coming from the oil pan.

101 Propose Mookeeh starion adjustable LCA's   http://i.ebayimg.com/t/Mookeeh-MK1-83-88-Starion-Adjustable-Front-Lower-Control-Arms-Arm-Camber-/00/s/NTAwWDUwMA==/z/0zwAAOxydB1ShduN/$_12.JPG