I'm just a poor college student, and couldn't afford a fancy boost controller so i went to my local hardware store, and bought a garden hose vave for 3 bucks a fitting to a vac line and a T for under 5 bucks works grrreat, though takes about 20 min to get used to the adjustment, and for the cost of a meal deal at Micky D's!!   Z

I installed a new Modyne radiator and two 10" Hayden fans . I notched the strutrod mounting brackets all the way down to the bottom lip and welded a plate on the bottom side to stengthen the bracket  with this mod the hood will close with out hitting the radiator . I also cut the bottom radiator hose and put  a 1 1/4" barbed fitting with a 3/8npt saddle nipple(5.00) inline so I could mount the thermal fan switch so I didn't modify the radiator in any way so I could maintain the lifetime warrant

I installed the urathane mounts yesterday and we I started the car it was like somebody shove a quarter in the slot.  The car vibrates terribly.  I have the balance shafts removed and it was supposed to be balnced and blue printed by EIP.  Has anyone else put these in.  I put all the mounts in.  Engine, tranny and rear.  It was a pain in the arse!  I was swaping out the 86 rear for an 88 so I had to do all the work anyway but man, I would hate to change them just to change them.

This battery will accomidate running a 2.5" pipe thru the drivers side radiator "pass-thru". This will save you considerable time leaving it up front than relocating the battery in the trunk. This battery has more power than batteries twice its size.   From Summit Racing (part # PVT-890000 $119.95)  The dimensions are: 7.75" L x 6.5" W x 6.75" H   http://store.summitracing.com/default.asp?...archType%3DBoth --------------------------------------------------------------------------------