I'm looking to get my 4E reflashed with the current updated software.   01/11/05 Version 14 Software Release for EM-3 Systems   V14 software for EM-3 systems is now available as an upgrade chip which you can install yourself. EM-3 systems cannot use the nitrous or a/c functions but have the AFR data logging capability. Changing the chip will involve writing down your existing values and transfering them to your new chip   SDS is offerring data logging WBo2 readings...look how slick that is...

I have hooked up my EM-4D system (no ignition control).  No i,m trying to make the stock ignition work with the sds.  I have supplied kO pwr, and gnd to the module and ran wires from the detonation sensor to the corresponding wire on the module, as well as the black and white wires from the distributor to the module.  Now I believe a few wires can be removed (ones concerning altitude adjustment).  Now does the black with yellow tracer wire coming from the distributor signal generator need +12

I checked out a car today and this is what I found:   http://www.cardomain.com/memberpage/515841/4   Can I cut this out and weld in a new section?  Or is this iminent death to this Quest?

A few months back Shawn mentioned doing a prototype leather console cover to replace our brittle plastic pos-   Since I was the first person to buy one of his awesome shifter boot's,  I jumped at the chance of having the prototype console cover.   IMO, it turned out great and is exactly what I wanted.   I opted for "raised" RALLI///ART lettering and a cool Mistu symbol   http://img.villagephotos.com/p/2003-5/202062/KWCYQ-100_0074.JPG   http://img.villagephotos.com/p/2003-5/202062/SMSBQ-100