i had new rotors and pads installed the other day and started driving and kept on hearing noise when taking turns. Get out of the car and smell somethin burning. Take it back into the guy who did the rotors and tell him i think something must be out of adjustment. He comes back and tells me my ebrake cable needs replaced because the capilers keep on grabbing my real rotors. Assuming this guy isn't bullshiting me how much $$$ is this gonna cost??

i need an idler arm (or just the idler bushing) and inner and outter tierod ends (both sides). my bushings and balljoints on these components are pretty much shot. just wondering if anyone has a good used set (or pieces) that i could get. if you got some please let me know what you want. thanks in advance.

I need a thermovalve off a throttle body. Its the sensor that screws in the throttle body that has two ports that run vacuum lines.I also need a throttle position sensor.I want to be able to pick up parts my car desperately needs them. thanks

Accepting offers:   VDO Vision Series (black) boost gauge, minor chips around bezel--easily touched up, 30in vacuum/25PSI boost.   VDO 80PSI electrical oil pressure gauge, 90° sweep, mounted but never connected. Black face, white needle and markings with blue scale bar. Includes sender.   VDO 16V voltmeter, matches oil-pressure gauge, also mounted/never connected.   Cyberdyne digital temperature gauge; not sure of scale or illumination color but it was in an '87 Conquest--also never connected