Was doing a little research and decided to combine my findings in one posts. First I must say these are to be done on a good working STOCK cooling system (ie:recored/rodded radiator, new Tstat, Working fans etc.)   Cooling Upgrades --Removing the little check valve from the bleed hole on thermostat (allows better flow)   --Drilling additional or enlarging existing hole on thermostat (allows much more flow)   --Add water wetter to the system   --Wire both fans to low temp switch (will kick both f

edit

When I got her. Leaky injectors, switched around plugwires, mad intake leaks, and so on. http://www.ilostmymind.com/upload/conquest_front.jpg http://www.ilostmymind.com/upload/conquest_drive.jpg http://www.ilostmymind.com/upload/conquest_pass.jpg tryin to look hot: http://www.ilostmymind.com/upload/dcp_2743.jpg after i installed the 16g and put the boost at 10psi http://www.ilostmymind.com/upload/dcp_2755.jpg new wheels, teh hotness http://www.ilostmymind.com/upload/dcp_2901.jpg W/ the 83 hood..

Looking for anything under a 9b. I may be able to do a 12a, but nothing new please. Audi K03 and such too. This is just a little side project for a small motor.     Junk is okay, so long as it spins and can possibly spool.   Dave