Ok, time to begin this write up. This has been an on going project for me and I'm a few bolts away for completion. These were originally going to go on a Ford Taurus SHO (I've had several) using the same process. After much thought, i decided to use them for my starion instead, seeing as there isn't much selection as far as coilovers. Yes there are D2s, but my decision to build these centered around adjustability and access to a broader range of damper options. D2s, in my humble opinion, are goo

what's the minimum and maximum gap for stock g54b. Is the gap different with different spark plug brands? I see .044 gap with ngk brand that seems like a lot of gap.

Replacement studs are NLA from Mitsu & various others are close but not dead on. Typically, most will "work", but have one of more characteristics not quite right: head to tall, too wide, shoulder not right size, length off, etc.   The correct one is by DOORMAN, part # 610-415

I was on the process of removing the turbo and exhaust manifold this weekend and I noticed some things that do not look right to me. 1st I noticed the throttle, it looks like the exhaust all nice and black. 2nd I noticed the manifold each cylinder appeared to burn different, the fist cylinder is nice and black, second cylinder, its only half way burning, while the third and forth cylinder had a nice white coat. 3rd the Downpipe has the same white coat. I am wondering is this is normal, If not wh