ok i got  back to checking the  cam timeing today and  this is what i found, with a chain  kit with 3k miles on it and the intake  began to open at  12BDTC ,manual says  25BTDC,,this is  with a caravan hear  it has been reman,  no way of knowing the head thickness, but this shows when looking at the  cam pin to be a little after 12:00, but was set up  useing the  bright links  , with t cover off, so i know it's in place, this shows  the cam to be 13 degrees late, it was check'd at .006 intake v

Hello , I just bought a CNM multiport manafold unused but I have few unanswered questions. 1.The mounting flange to the head does not cover a hole between #3&4 cylinders they left it open for some reason. I believe hole goes though the head to the exhaust side but for what purpose?And what do I do with it?   2.With out coolant circulating through the manafold should the return line from the heater core enter before the t-stat or after?   any insite will be of help because its only g

i am about to swap in a mech adjuster vavlve train/rockers into my car and need to know the lash #'s for the intake and exhaust valves.I know I will get many different answers but just want a starting point.

I sent my turbo out to be referb under the 18g upgrade price.  Sent it out, got a prompt reply that they had recieved my turbo.  About a week later a followup call that everything looks good and the rebuild is about the start.     At that point, I paid up, price as advertised.  My mechnaic had questions about the specs of the turbo and so on so he could deisgn things out properly.  After a few miss fires between Robert, tech at Forced, and my mechanic, but they finally hooked up.  My mechanic w