Search the Community

<SOLD!> AMC Marnal head (Spain casting) w/Monsta Banshee roller cam set-up... <SOLD!> I bought this from notfried earlier in the year and have realized that I will probably never need it. My car is in very near original condition and my engine was meticulously rebuilt less than 10K miles ago by K.D.M. It is not my daily driver and I do not race it, so I will probably have no need to rebuild the engine for a very long time. I have only opened the box from notfried to inspect it and then I sealed it back up. I am asking less than what I paid for it. The original details posted by notfried are below: "Spain casting Marnal head with 500 miles on it... It is gasket matched ported on the exhaust side, using a flow bench, has 1mm over-sized stainless steel valves, Schneider heavy-duty springs, and was made for a high-lift cam. The cam is a Tim C. Monsta Banshee Roller cam (INT Duration @.050: .207° Seat-To-Seat: 265°, EXH Duration @.050: .196° Seat-To-Seat: 262°, INT Lift: .480 w/1.6 ratio rockers;, EXH Lift:.459, Lobe Center Separation: 111.5°, Degree intake Lobe to 107°, Power Range: 2500-6500RPM), the rockers are 1:6 3000GT rollers, and the gear is a MK1 from Mookeeh. All the intake/exhaust hardware came from Dad, along with lifters and Fel-Pro 9116 head gasket set. This head was bought from the "Marnal GP OG", Richie_Rich, back in the day, sat in a box on a shelf most it's life, and got finally strapped to an engine that the machine shop installed the rings upside down in. Hence the 500 miles and the soot in the chambers. I included a pic of the soot because underneath it it is perfectly clean, and it falls off easily. I have over $1500 invested in this head/cam set-up. $900 shipped (continental US)

Hey all. I have a Spain casting Marnal head with 500 miles on it that I am no longer needing. It is gasket matched ported on the exhaust side, using a flow bench, has 1mm over-sized stainless steel valves, Schneider heavy-duty springs, and was made for a high-lift cam. The cam is a Tim C. Monsta Banshee Roller cam (INT Duration @.050: .207° Seat-To-Seat: 265°, EXH Duration @.050: .196° Seat-To-Seat: 262°, INT Lift: .480 w/1.6 ratio rockers;, EXH Lift:.459, Lobe Center Separation: 111.5°, Degree intake Lobe to 107°, Power Range: 2500-6500RPM), the rockers are 1:6 3000GT rollers, and the gear is a MK1 from Mookeeh. All the intake/exhaust hardware came from Dad, along with lifters and Fel-Pro 9116 head gasket set. This head was bought from the "Marnal GP OG", Richie_Rich, back in the day, sat in a box on a shelf most it's life, and got finally strapped to an engine that the machine shop installed the rings upside down in. Hence the 500 miles and the soot in the chambers. I included a pic of the soot because underneath it it is perfectly clean, and it falls off easily. I have over $1500 invested in this head/cam set-up and am looking to get $950 shipped and insured (continental US). Here's some pics. Thank you and have a blessed day. http://i85.photobucket.com/albums/k61/notfried/19126_946004952086033_1300947645577761121_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11127877_946004912086037_6125106262711539536_n.jpghttp://i85.photobucket.com/albums/k61/notfried/10420280_946004895419372_7337388523279718732_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081046_946004882086040_5515029591966322676_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081437_946004858752709_9131302519937521197_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11084270_946004835419378_1518888447213133192_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11133708_946004805419381_6383342337114360845_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081361_946004792086049_8695328717371600265_n.jpghttp://i85.photobucket.com/albums/k61/notfried/10502486_946004465419415_5358873570842221190_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11134147_946004538752741_4518085174317736082_n.jpghttp://i85.photobucket.com/albums/k61/notfried/18915_946004768752718_4311894291661751461_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081498_946025185417343_692370248185311202_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11082594_946025798750615_5697647407571953883_n.jpg

Documented TEP HR70 cam, documented 300 RWHP dyno run @12 psi boost G54BT, 0.88 A/R turbine. http://picturehosting.com/images/oblique9881/aftercoating.jpg http://picturehosting.com/images/oblique9881/doc.jpg http://picturehosting.com/images/oblique9881/dyno.jpg $150, shipping included to the lower 48.

http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/9349E06C-F969-40ED-AE66-2F149DC0A372.jpg http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/AE7EFA33-8290-4965-B0C2-A47E2BC33E26.jpg http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/00C99CF4-7E79-4F33-B734-6EE1E7EF5049.jpg http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/08A79989-29BE-4C77-8786-B80CDDAE59A2.jpg showing the porting http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/1B0BCC54-7CE1-4EBB-883E-0A66723889F9.jpg http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/CA1A62F3-35C3-43CE-9744-33D76D6A3167.jpg valve cover notched for ARP studs http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/376D4A0A-817C-4A14-9F8D-A5EC43F435CE.jpg Just needs a light polish http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/F54BF346-83AC-426C-A5DD-BFFEE908E724.jpg ported intake http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/5238D9C7-A022-4969-B91A-0F02C2FD10C5.jpg close up http://i1123.photobucket.com/albums/l543/autotr8er/Mobile%20Uploads/70AD1E2C-731A-454A-8609-CF5EF14ECE28.jpg I do not sell Junk! I'll post some additional photos showing there is no warping or additional concerns. Don't know what springs or cam are in it. Selling it all for $250 plus shipping. Ported intake, Ported Head, ARP studs, Polished Valve Cover. The Studs alone are $75 to $100 bucks by themselves. Sorry guys, but I've gotten burned lately on shipping, so I'm not paying a dime for it. I'm only selling it to help whoever needs it. So I don't upset anyone, the first to PM will get first shot. You have 48 hours to pay after I give you my Paypal address. Then it goes to the second PM, third and so forth (no pun intended) I'm sure it will go quick at this price. Take care folks. Richard

hey guys im looking for some parts for my starquest 1. turbo to intercooler hard pipe 2. g54b upgraded camshaft that works with a stock non jet valve head 3. rear camber plates 4. front and rear sway bars 5. front and rear strut tower bars

I was wondering something. before I toss my head back on the car (came back from machine shop a bit ago). I was wondering if anyone could tell me if the mechanical rocker arms are different between intake and exhaust. As in, can they be interchanged. If not, can someone let me know how to tell which should be intake and which should be exhaust. I left the rocker assembly on when I took it to the shop, I just want to make sure it's right before I toss it in the car. As I hope to not have to pull anything else out of this car again for a long time

Hi all, Haven't been around here much in the last year or so. I have to sell some parts for Dr.s bills. To start with I have: 3 piece front airdam New $350 SOLD http://jeepquest.net/gallery2/d/2362-2/P1010301.JPG Schneider 284 hydraulic cam nice shape used. $120 SOLD http://jeepquest.net/gallery2/d/2319-2/P1010286.JPG http://jeepquest.net/gallery2/d/2323-2/P1010287.JPG http://jeepquest.net/gallery2/d/2326-2/P1010288.JPG Nice homemade rear ajustable camber plates used $75 Both camber plates will be bead bead blasted and look like the 1st one in the pic. http://jeepquest.net/gallery2/d/2353-2/P1010297.JPG http://jeepquest.net/gallery2/d/2356-2/P1010298.JPG http://jeepquest.net/gallery2/d/2359-2/P1010299.JPG ACT 240mm 6-puck solid hub clutch disk used $90 http://jeepquest.net/gallery2/d/2335-2/P1010291.JPG http://jeepquest.net/gallery2/d/2332-2/P1010290.JPG http://jeepquest.net/gallery2/d/2341-2/P1010293.JPG All prices are best offer and are in Huntsville, Alabama

Hey Fellas, I am looking for a set of mechanical adjuster rocker arms for the G54BT. If you also have a mechanical cam, I'll take that too. Please PM or reply with what you've got and what you want for it? I can pay straight up but I do have a lot of parts if there's something you want to trade. (I do have a set of hydraulic roller rockers I don't need.) Thanks,