angryhero46 Posted September 3, 2007 Report Share Posted September 3, 2007 So i noticed when i install the FIP manifold the TPS hits the vaccum advance.If i have an MSd 6al do i need it?Cant i just remove it(Vaccum advance)? Link to comment Share on other sites More sharing options...
substock Posted September 3, 2007 Report Share Posted September 3, 2007 with the msd you will not be able to remove the vac advance. the only way you'd be able to remove it is if you are running one of fip's ignition ecu's Link to comment Share on other sites More sharing options...
angryhero46 Posted September 3, 2007 Author Report Share Posted September 3, 2007 I bought the entire kit.I dont think they would sell me this if i needed something else to. Link to comment Share on other sites More sharing options...
angryhero46 Posted September 3, 2007 Author Report Share Posted September 3, 2007 http://i5.photobucket.com/albums/y170/angryhero46/img_1281.jpg[/img] Link to comment Share on other sites More sharing options...
substock Posted September 3, 2007 Report Share Posted September 3, 2007 thats strange,i don't think this had happened before. might want to talk to them regarding this Link to comment Share on other sites More sharing options...
88TSI_Rob Posted September 3, 2007 Report Share Posted September 3, 2007 Looks like you may have a slightly different TB. Here's another car with the Hurricane installed, and the VA seems to fit better:http://www.cardomain.com/ride/2402329/3 Link to comment Share on other sites More sharing options...
angryhero46 Posted September 3, 2007 Author Report Share Posted September 3, 2007 And which tstat have you guys been using for this.It sayd chevy will work.What should i ask for when i go to the store? Link to comment Share on other sites More sharing options...
substock Posted September 4, 2007 Report Share Posted September 4, 2007 And which tstat have you guys been using for this.It sayd chevy will work.What should i ask for when i go to the store? you can either get a 180 or a 160 stat i'm running a 160 right now Link to comment Share on other sites More sharing options...
ESIrType? Posted September 4, 2007 Report Share Posted September 4, 2007 Your intake isn't bolted up. What happens when you do bolt it? It looks like it would pull it up enough for you. Shawn Link to comment Share on other sites More sharing options...
FuelinjectionPro Posted September 4, 2007 Report Share Posted September 4, 2007 So i noticed when i install the FIP manifold the TPS hits the vaccum advance.If i have an MSd 6al do i need it?Cant i just remove it(Vaccum advance)?I have not seen this before, but most of the HURRICANE-4 guys also have the IgnitionPro1 or ED-IS-ON system and do not have the vaccum advance. You can turn the TPS to face the other way, I think you will need to switch the red and black wires also. I will check. I will have to see if our supplier made a change in the TB.Ed Link to comment Share on other sites More sharing options...
angryhero46 Posted September 4, 2007 Author Report Share Posted September 4, 2007 Your intake isn't bolted up. What happens when you do bolt it? It looks like it would pull it up enough for you. ShawnYeah i cant bolt it up because the tps hits the VA.I have enough room to switch the Tps around Link to comment Share on other sites More sharing options...
QuietQuest Posted September 4, 2007 Report Share Posted September 4, 2007 Use a dremel. Take a little off the tps plug, and a little off the vac. advance. Link to comment Share on other sites More sharing options...
ESIrType? Posted September 4, 2007 Report Share Posted September 4, 2007 Your intake isn't bolted up. What happens when you do bolt it? It looks like it would pull it up enough for you. ShawnYeah i cant bolt it up because the tps hits the VA.I have enough room to switch the Tps around That was my next suggestion. I hope the rest goes smoothly for you. I think you'll be happy with the setup. Shawn Link to comment Share on other sites More sharing options...
Recommended Posts