sittin-sideways Posted September 20, 2006 Report Share Posted September 20, 2006 ANYTHINGS IS POSSIBLIESSTARION WITH SKYLINE MOTORSpretty bad a** easyyyyy powers :twisted: just a dream. lol Link to comment Share on other sites More sharing options...
emagdnim Posted September 20, 2006 Report Share Posted September 20, 2006 I would learn how to type and speak english first. :wink: oh, the answer is no. Link to comment Share on other sites More sharing options...
madmitch Posted September 20, 2006 Report Share Posted September 20, 2006 Should be possible. There is a guy who tossed a 1jz into a stairon. RB26dett is quite expensive though, would be cheaper to go with a toyota inline 6 unless you had a good hookup. Link to comment Share on other sites More sharing options...
Big Al Posted September 21, 2006 Report Share Posted September 21, 2006 I got a Nissan inline 6 turbo that might fit in there... But it's mated to an auto ICKY. Link to comment Share on other sites More sharing options...
sittin-sideways Posted September 21, 2006 Author Report Share Posted September 21, 2006 let me guess u find out that a skyline motors is like 5 gsdam u dont know how to shop man i know where to get it for 2-3 gs with trans and ecu and all brackets and harness hole engine with everthing includeing the turbos.it is prices , i aint going to say it aint butjust cant buy from someone that going to try get a arm and leg from u look like not man people here have diffenet ideas. :twisted: Link to comment Share on other sites More sharing options...
sittin-sideways Posted September 21, 2006 Author Report Share Posted September 21, 2006 and to not to be mean RB26DeTT hands down better engine then the starion and got lot more parts in japen for that engine, thenstarion have in hole world. hey not try to say i dont like my car if i didnt i would have not buy it Link to comment Share on other sites More sharing options...
button Posted September 22, 2006 Report Share Posted September 22, 2006 if you live in america, you must like america. why dont you learn the fu****** language. Link to comment Share on other sites More sharing options...
Starquest86 Posted September 22, 2006 Report Share Posted September 22, 2006 Im going to have to agree with you on only one point of what you have said. Yes the Rb26 is a good motor and has many more aftermarket parts than the G54B, but most of the parts for the RB26 come from japan so therefore if you are some rich biach then go for it. I like to get my parts when i need them or not have to wait weeks for them to get shipped over from japan. Plus like many people will tell you if you take that 2 or 3 or4 or 5 grand your willing to throw down on that RB26 and just use that money on your G54B you will probably be at the same or more hp than a stock RB26.Like a smart man on this site likes to say "to each their own". Garrett G$ and unless your a foriegner take your time and re read what you type your gramar isnt the best Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted September 22, 2006 Report Share Posted September 22, 2006 Good luck getting replacement parts in a timely fashion, unless you pre-order everything you might want in bulk.. A good friend has a R32, and another friend has a RB26 swapped 240sx. And no, there aren't more parts for the RB in japan alone than there is for the g54b in the whole world. :roll: Don't be silly. Aftermarket parts, yeah, but that's not a shocker. Have you ever seen how much it is to rebuild a RB motor? Don't even try to compare that to rebuilding a g54b. How much power do you really need anyway? Do you still want good handling characteristics? A 4g64/63 hybrid is the answer. But screw it. Just go do it. Don't talk about it, be about it. :wink: Link to comment Share on other sites More sharing options...
patra_is_here Posted September 23, 2006 Report Share Posted September 23, 2006 rb26 has so many downsides. it's not worth doing IMHO. Link to comment Share on other sites More sharing options...
DJ_Lazarek Posted October 7, 2006 Report Share Posted October 7, 2006 The 2JZ is superior to the RB, hands down, no questions asked... DJ Link to comment Share on other sites More sharing options...
xtremeboost2 Posted October 12, 2006 Report Share Posted October 12, 2006 not to start the whole debate of what engine is better.... if u had to choose i would do a 2jz over and rb any day.... its nice when u can go to discount or autozone or even a dealership to pick up ur basic parts like atl., water pump, oil pump etc. but to be honest i wouldnt waste my time with either of those engines. If u have to the money to buy a uesless engine then you'll have more than enough to build an engine that has plenty of potenial. Link to comment Share on other sites More sharing options...
DJ_Lazarek Posted October 12, 2006 Report Share Posted October 12, 2006 not to start the whole debate of what engine is better.... if u had to choose i would do a 2jz over and rb any day.... its nice when u can go to discount or autozone or even a dealership to pick up ur basic parts like atl., water pump, oil pump etc. but to be honest i wouldnt waste my time with either of those engines. If u have to the money to buy a uesless engine then you'll have more than enough to build an engine that has plenty of potenial. Why wouldn't you choose either engine? Are you saying that you would rather spend the money it would cost for a 2J or RB swap on the G54B? Because all you have to do on either engine is turn the boost up and you have an instant 400hp... Bolt on's will get you to 800hp on the 2J and the 2J's are good for nearly 1000hp on stock internals... The RB is only good to about 500hp on stock internals though that is why the 2J is a better choice and you can make more power with the 2J, even the guys on the skyline forums agree that the 2J is a better engine than the RB... So if you want a Conquest that makes over 400-500 hp the choice is simple. However if your goal is 300hp than an engine swap is useless... DJ Link to comment Share on other sites More sharing options...
xtremeboost2 Posted October 12, 2006 Report Share Posted October 12, 2006 Why wouldn't you choose either engine? Are you saying that you would rather spend the money it would cost for a 2J or RB swap on the G54B? Because all you have to do on either engine is turn the boost up and you have an instant 400hp... Bolt on's will get you to 800hp on the 2J and the 2J's are good for nearly 1000hp on stock internals... The RB is only good to about 500hp on stock internals though that is why the 2J is a better choice and you can make more power with the 2J, even the guys on the skyline forums agree that the 2J is a better engine than the RB... So if you want a Conquest that makes over 400-500 hp the choice is simple. However if your goal is 300hp than an engine swap is useless... DJ thats is correct and that is what i am exactly doing right now. through the resources i have i am doing thing to the g54b that most people can only dream of doing.... it is just my choice to work with the g54b then with any other engine. i like doing things that people say cant be done. and the g54b has alot of potenial when u do the right things besides why would i wanna go with a 2jz or and rb when those engines have a smaller displacment then mine? and yea 2jz can hold 1000hp and stock internals but do a couple of pulls on a dyno with that much power and see what happens. im pretty sure u would know what will happen thats why the common hp for supras running stock internals is 700whp... Link to comment Share on other sites More sharing options...
DJ_Lazarek Posted October 12, 2006 Report Share Posted October 12, 2006 How does a 2J have smaller displacment than your engine? I know the G54B has potential and I think it's cool you want to make one make mega hp, you would just obviously have more potential with a 2J or even an RB26... How much hp are you looking to make anyways? And what are you doing to the engine that most people only dream of? I am not trying to mock you by the way, I am just curious... DJ Link to comment Share on other sites More sharing options...
xtremeboost2 Posted October 12, 2006 Report Share Posted October 12, 2006 How does a 2J have smaller displacment than your engine? I know the G54B has potential and I think it's cool you want to make one make mega hp, you would just obviously have more potential with a 2J or even an RB26... How much hp are you looking to make anyways? And what are you doing to the engine that most people only dream of? I am not trying to mock you by the way, I am just curious... DJ well i dont wanna let the cat out of the bag yet all i can say is theres a hint in my sig. im looking to make about 900whp but well see. Link to comment Share on other sites More sharing options...
xtremeboost Posted October 14, 2006 Report Share Posted October 14, 2006 How does a 2J have smaller displacment than your engine? I know the G54B has potential and I think it's cool you want to make one make mega hp, you would just obviously have more potential with a 2J or even an RB26... How much hp are you looking to make anyways? And what are you doing to the engine that most people only dream of? I am not trying to mock you by the way, I am just curious... DJ well i dont wanna let the cat out of the bag yet all i can say is theres a hint in my sig. im looking to make about 900whp but well see. WOW , that sounds serious !!!!! Best Regards PS: check-out my sig too !! :twisted: Link to comment Share on other sites More sharing options...
DJ_Lazarek Posted October 14, 2006 Report Share Posted October 14, 2006 How does a 2J have smaller displacment than your engine? I know the G54B has potential and I think it's cool you want to make one make mega hp, you would just obviously have more potential with a 2J or even an RB26... How much hp are you looking to make anyways? And what are you doing to the engine that most people only dream of? I am not trying to mock you by the way, I am just curious... DJ well i dont wanna let the cat out of the bag yet all i can say is theres a hint in my sig. im looking to make about 900whp but well see. WOW , that sounds serious !!!!! Best Regards PS: check-out my sig too !! :twisted: xtremeboost, you want to make 1000hp? Link to comment Share on other sites More sharing options...
xtremeboost Posted October 15, 2006 Report Share Posted October 15, 2006 How does a 2J have smaller displacment than your engine? I know the G54B has potential and I think it's cool you want to make one make mega hp, you would just obviously have more potential with a 2J or even an RB26... How much hp are you looking to make anyways? And what are you doing to the engine that most people only dream of? I am not trying to mock you by the way, I am just curious... DJ well i dont wanna let the cat out of the bag yet all i can say is theres a hint in my sig. im looking to make about 900whp but well see. WOW , that sounds serious !!!!! Best Regards PS: check-out my sig too !! :twisted: xtremeboost, you want to make 1000hp? No , let me correct you - I am making 1000HP !!!!!! Frank Best Regards Link to comment Share on other sites More sharing options...
DJ_Lazarek Posted October 15, 2006 Report Share Posted October 15, 2006 Seen a few posts you have mentioned that in... How about a dyno sheet? DJ Link to comment Share on other sites More sharing options...
xtremeboost Posted October 16, 2006 Report Share Posted October 16, 2006 Seen a few posts you have mentioned that in... How about a dyno sheet? DJ When my car is done you'll see both the car and the engine. If you'd like I can post some random Dyno sheet and say its my car , I'd rather wait till my car is done . If you still wonder just look at my other post in which I'm selling a 2.6 7 second set-up . Best Regards Frank Link to comment Share on other sites More sharing options...
lowboost Posted October 16, 2006 Report Share Posted October 16, 2006 I want pictures of the bottom end reinforcement that was done to the 2.6 which was pulling 7 sec 1/4mile passes. Mainly speaking the gurdle... Link to comment Share on other sites More sharing options...
DJ_Lazarek Posted October 16, 2006 Report Share Posted October 16, 2006 I seen the post of you selling the Engine... Do you have a running 1000 hp engine in your car is my question? And if you do..., you obviously must have a dyno sheet since you obviously had to dyno your car to know that it is making a 1000hp... DJ Link to comment Share on other sites More sharing options...
xtremeboost2 Posted October 16, 2006 Report Share Posted October 16, 2006 well the engine he selling is not the one. hes is running the exact setup ill be running. few weeks you will see some numbers .... where waiting for certain parts to be made like that bottom end gurdle and a few little things.... Link to comment Share on other sites More sharing options...
xtremeboost Posted October 17, 2006 Report Share Posted October 17, 2006 I want pictures of the bottom end reinforcement that was done to the 2.6 which was pulling 7 sec 1/4mile passes. Mainly speaking the gurdle... LOL , no pics of that yet man !!!! but you are right on that one , we are running one !!!! Link to comment Share on other sites More sharing options...
Recommended Posts