davida. Posted November 12, 2003 Report Share Posted November 12, 2003 here is the link, you can check it out for yourself. clutches, valves, brakes, pistons, pumps, cams.... http://www.export-auto-parts.com/ I figure with some interest we can meet the $500 minimum purchase without a problem. I have not worked with these folks so I can only assume they will deliver as advertised. I don't mind running the buy if there is interest. quanities are limited so its first come first served. I need everyones feedback to get things going. da. Quote Link to comment Share on other sites More sharing options...
Distorted.Clarity Posted November 12, 2003 Report Share Posted November 12, 2003 how do i know what one my car is since i dont have it here Tbo EFI or Intrcl im a 88 tsi Quote Link to comment Share on other sites More sharing options...
88TSI_Rob Posted November 13, 2003 Report Share Posted November 13, 2003 All 88's are intercooled. Nothing looks too terribly interesting. Mostly brake and head-related parts. Tim might be interested in the cams at $17 a piece and the water pumps at under $12 seem like a good deal. You'd still have to figure in shipping on top of those prices though. Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 13, 2003 Report Share Posted November 13, 2003 I highly recommend if anyone is interested in a part # to ask here as to the descriptions are very vague and not always correct. I have the Raybestos and Beck Arnley catalog if anyone wants to be sure. Take care Shawn Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 13, 2003 Report Share Posted November 13, 2003 I will order the following; 1 x TRW Rear Lower Control Arm Bushings 12449 $2.98 each 14 x Beck Arnley Outer Tie Rod Ends 101-4206 $3.91 each 8 x Beck Arnley Outer CV Boot Kits 103-2253 $2.05 each 4 x Beck Arnley Inner CV Boot Kits 103-2261 $1.97 each 13 x Beck Arnley Rear Wheel Seals 052-3236 $0.70 each 1 x Beck Arnley Clutch Master Cylinder 072-8463 $17.00 each 1 x Beck Arnley Clutch Slave Cylinder 072-8456 $9.61 each 2 x Raybestos Rear Brake Pads RPD144 $2.85 each 2 x Beck Arnley Front Brake Rotors 083-2189 $14.34 each 1 x Beck Arnley Rear Brake Rotors 083-2190 $17.39 each 4 x Raybestos Front Brake Pads PGD259M $4.99 each 2 x Beck Arnley Front Brake Caliper Hardware 084-1409 $4.96 each 1 x Beck Arnley Brake Master Cylinder 072-8247 $22.42 each If you would like to organize this, that would be wonderful. I can pay anytime via Paypal. I would recommend that you order everything and have it shipped to your own place of residence and then box and send out from there. I would think that is the only way the company will do so on the shipping anyhow. I have no problem paying for the packing/shipping from your residence. Keep me posted. Take care Shawn P.S. How often do they update their site? I would assume some items could be sold at anytime and that others could be added at any time as well.... Quote Link to comment Share on other sites More sharing options...
87cquest Posted November 13, 2003 Report Share Posted November 13, 2003 wow what a great site. You can replace all those parts that need to be replaced but we never do cause they're no performance related and they're a lot. But, DANG! 9 bucks for a slave? 15 for calipers? I'm in for some stuff. also, is this oil switch as in oil pressure sending unit? MFG : Beck Arnley Part #: 201-1564 Quote Link to comment Share on other sites More sharing options...
87cquest Posted November 13, 2003 Report Share Posted November 13, 2003 35 for a power steering pump! and only 9 for the oil pressure sender! It's like finding great buys at an estate sale or something ;D Quote Link to comment Share on other sites More sharing options...
Daniel_R Posted November 13, 2003 Report Share Posted November 13, 2003 This kinda sounds good, but some of the part #'s dont seem a little funny to me. i saw a couple of Borg Warner things, that dont look like BW #'s- may not be things BW makes anymore. Most Clutch Master and Slaves come from Raybestos, BA, etc. In Beck Arnley it seems like a lot of the #'s are right to me, but havent sold BA in a while. A couple of the Raybestos #'s dont look right either (D144? would be maybe a PGD144?). The Perfect Circle, Champ wires, and comfort temp looks right. If I were yall I wuld double check with local parts houses and make sure they are right #'s. NAPA has BA and PC (Clevite), Parts Plus houses will have PC, Raybestos, Champ Wires, and BW. Except for Bendix, I havent really heard of the other lines before. Other than that, its seems like a very good buy. Just my opinion. :-/ Quote Link to comment Share on other sites More sharing options...
knightrider Posted November 14, 2003 Report Share Posted November 14, 2003 I'd be in for front calipers if this ever goes anywhere. Thanks, Ryan. Quote Link to comment Share on other sites More sharing options...
backslider Posted November 14, 2003 Report Share Posted November 14, 2003 I have bought from this company before. I had no problems. This company has been mentioned before on this site. I guess back then if you didnt meet their sale requirments you had to pay 50 bucks. You might want to inquire about it again. I bought well over 600 bucks of spare parts for 125 plus the $50 fee from that company. Quote Link to comment Share on other sites More sharing options...
jeff_87tsi Posted November 15, 2003 Report Share Posted November 15, 2003 hi shawn can i ask a favor i am putting together a large order of parts as well and wondered if you could check the calipers for me - they didnt have both loaded calipers for the front although i found them under starion under raybestos brand. they are confusing in their terminology like listing non turbo models with turbo using different bolt patterns for the rotors... these are back ups for my 87 conquest 1 x Beck Arnley bk calipers front right 079-0096 8.61 1 x Beck Arnley bk calipers front left 079-0095 8.61 1 x Beck Arnley bk calipers rear loaded right 079-0098 20.68 1 x Beck Arnley bk calipers rear loaded left 079-0097 20.68 are they the right ones? thanks jeff Quote Link to comment Share on other sites More sharing options...
jeff_87tsi Posted November 15, 2003 Report Share Posted November 15, 2003 here is what i would take provided shawn confirms the calipers 2 x TRW Rear Lower Control Arm Bushings 12449 $2.98 each 5.96 4 x Beck Arnley Outer Tie Rod Ends 101-4206 $3.91 each 15.64 2 x Beck Arnley Outer CV Boot Kits 103-2253 $2.05 each 4.10 2 x Beck Arnley Inner CV Boot Kits 103-2261 $1.97 each 3.94 4 x Beck Arnley Rear Wheel Seals 052-3236 $0.70 each 2.80 1 x Beck Arnley Clutch Master Cylinder 072-8463 $17.00 1 x Beck Arnley Clutch Slave Cylinder 072-8456 $9.61 1 x Raybestos Rear Brake Pads RPD144 $2.85 2 x Raybestos Front Brake Pads PGD259M $4.99 9.98 2 x Beck Arnley Front Brake Caliper Hardware 084-1409 $4.96 each 9.92 1 x Beck Arnley Brake Master Cylinder 072-8247 $22.42 4 x Beck Arnley valve cover gaskets 036-1254 $1.35 each 5.40 2 x Beck Arnley intake manifold gaskets 037-4558 .79 each 1.60 1 x Beck Arnley bk calipers front right 079-0096 8.61 1 x Beck Arnley bk calipers front left 079-0095 8.61 1 x Beck Arnley bk calipers rear loaded right 079-0098 20.68 1 x Beck Arnley bk calipers rear loaded left 079-0097 20.68 2 x Beck Arnley light relay 203-0055 2.90 5.80 2 x Beck Arnley hazard relay 202-0030 .78 1.56 2 x Beck Arnley Oil pan gasket 034-0489 1.40 2.80 2 x trw coolant temp sensor tx13 3.86 7.72 1 x Beck Arnley fusible links .67 jeff Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 16, 2003 Report Share Posted November 16, 2003 Jeff, You need to look at the quantities they have listed, like for the lower control arm bushings. If I was to get the one set they had, you would not be able to get another set by the looks of it. They list the quantity they have beside the part. Thats not to say they don't have more by this time. Just heading out for dinner, will check those numbers for you when I return. Lets make this happen people! Take care Shawn Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 16, 2003 Report Share Posted November 16, 2003 The numbers appear incorrect in my catalog. Â Those calipers are for 4 bolt wheels. Check here for confirmation; http://www.partsamerica.com/SelectParts.as...archFor=Caliper Take care Shawn Quote Link to comment Share on other sites More sharing options...
davida. Posted November 17, 2003 Author Report Share Posted November 17, 2003 ok, this idea is looking like it might fly. I am going to be out for the next week after that I will make contact with the vendor and get more cost details. just to keep things in the open since there are limited quanities I will post my parts list here and I encourage others who want in to do the same. ba 072-8463 clutch master cylinder ba 072-8456 slave cylinder ba 076-0334 rr bk caliper ba 076-0333 rl bk caliper ba 076-0457 fl bk caliper ba 076-0458 fr bk caliper bx h16005 bk caliper bushing kit ba 108-5063 ps pump ba 178-3198 fusible link ba 083-2190 rear rotors (x2) ba 101-4206 outer tie rod (x2) ba 072-8247 bk master cylinder da. Quote Link to comment Share on other sites More sharing options...
jeff_87tsi Posted November 18, 2003 Report Share Posted November 18, 2003 thanks shawn here is my update and yes i understand the quanties may not work out 2 x TRW Rear Lower Control Arm Bushings 12449 $2.98 each 5.96 4 x Beck Arnley Outer Tie Rod Ends 101-4206 $3.91 each 15.64 2 x Beck Arnley Outer CV Boot Kits 103-2253 $2.05 each 4.10 2 x Beck Arnley Inner CV Boot Kits 103-2261 $1.97 each 3.94 4 x Beck Arnley Rear Wheel Seals 052-3236 $0.70 each 2.80 1 x Beck Arnley Clutch Master Cylinder 072-8463 $17.00 1 x Beck Arnley Clutch Slave Cylinder 072-8456 $9.61 1 x Raybestos Rear Brake Pads RPD144 $2.85 2 x Raybestos Front Brake Pads PGD259M $4.99 9.98 2 x Beck Arnley Front Brake Caliper Hardware 084-1409 $4.96 each 9.92 1 x Beck Arnley Brake Master Cylinder 072-8247 $22.42 4 x Beck Arnley valve cover gaskets 036-1254 $1.35 each 5.40 2 x Beck Arnley intake manifold gaskets 037-4558 .79 each 1.60 2 x Beck Arnley light relay 203-0055 2.90 5.80 2 x Beck Arnley hazard relay 202-0030 .78 1.56 2 x Beck Arnley Oil pan gasket 034-0489 1.40 2.80 2 x trw coolant temp sensor tx13 3.86 7.72 1 x Beck Arnley fusible links .67 Quote Link to comment Share on other sites More sharing options...
knightrider Posted November 18, 2003 Report Share Posted November 18, 2003 I'm in for: BA 076-0457 front right caliper $6.94 BA 076-0458 front left caliper $6.94 BA 076-0334 rear right caliper $14.08 BA 076-0333 rear left caliper $14.08 Total = $42.04 for all four calipers! Hook it up! Ryan Quote Link to comment Share on other sites More sharing options...
conquestpa Posted November 19, 2003 Report Share Posted November 19, 2003 I'd be in, but it sounds too good to be true. Are you all sure that these parts aren't for the 4 bolt wheels? Older quests? Quote Link to comment Share on other sites More sharing options...
Distorted.Clarity Posted November 19, 2003 Report Share Posted November 19, 2003 someone want to help me with my buy not sure what part numbers to get 88 conquest tsi all 4 calipers, rotors, brake pads + hardware and caliper bushing kit . inner & outer tie rods + sleaves (both sides) master cylinder for breaks *is there another part to this?* Clutch Master Cylinder  and slave all the gaskets i would need for a rebuild and for the oil pan (times 4) coolant temp sensor *if this is for the rad then 2 for 180 temp* valve cover gaskets (times 4) ps pump Lower Control Arm + Bushings *also what do these do* intake manifold gaskets (times 4) distributor anything else i should consider getting? Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 20, 2003 Report Share Posted November 20, 2003 Yes alot of the parts are for the 4 bolt wheels. You must be sure of the part #'s before making your order. No one is responsible but you to make sure the #'s are what you require. No whining later. Finding all the #'s on the internet is not very difficult I have posted links before in this thread. Post what you want, period. I don't want another mismatched confusing GP going on here, do your homework, the prices reflect getting your hands dirty. Take care Shawn Quote Link to comment Share on other sites More sharing options...
Distorted.Clarity Posted November 20, 2003 Report Share Posted November 20, 2003 that site always gives this error "We encountered an error while processing your request." when looking up parts.. have a better site? Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 21, 2003 Report Share Posted November 21, 2003 Wierd, I just clicked on it and it worked fine. Why don't you just start at http://www.partsamerica.com/ and then choose shop by brand, click on Beck Arnley and do the leg work.....? Take care Shawn Quote Link to comment Share on other sites More sharing options...
davida. Posted November 27, 2003 Author Report Share Posted November 27, 2003 yes this is still a go. I will be compiling all the orders on monday/tuesday and sending email confirmations to everyone involved. of course all orders must be prepaid and I will include shipping/handling charges after I have contacted the vendor etc. etc. consider this weekend as the last call. da. Quote Link to comment Share on other sites More sharing options...
Shawn_Silva Posted November 27, 2003 Report Share Posted November 27, 2003 I'm ready to go. I might even add some other things when I get a chance to look.... Take care Shawn Quote Link to comment Share on other sites More sharing options...
knightrider Posted November 28, 2003 Report Share Posted November 28, 2003 I'm still in ;D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.