TSIREX Posted September 8, 2015 Report Share Posted September 8, 2015 I have stock injectors with afpr and stock exhaust manifold. Just wondering where the good deals are, maybe a td05 cartridge with 16g or a already modified td05 or td06. Just want a good reputable company that has a quick turn around with shipping for td05 -12a to upgrade. Possible a whole turbo charged with exhaust housing that is a direct bolt on for either td05 16g or td06 16g. Thanks in Advance, Rex Link to comment Share on other sites More sharing options...
TSIREX Posted September 8, 2015 Author Report Share Posted September 8, 2015 Under $800 Link to comment Share on other sites More sharing options...
Turbo Cary Posted September 8, 2015 Report Share Posted September 8, 2015 http://www.gpopshop.com They rebuilt and upgraded my turbo. Took about 2-3 weeks total to ship it and get it back. Good quality and nice people. Link to comment Share on other sites More sharing options...
TSIREX Posted September 10, 2015 Author Report Share Posted September 10, 2015 cool I took your advice and thanks. I talked to Gerald at gpops and it should arrive there today. Getting td06 exhaust wheel, 16g compressor wheel with machine work on exhaust side and new exhaust wheel with new compressor wheel for $640. I shipped the 16g compressor housing with turbo. Not a bad deal. Link to comment Share on other sites More sharing options...
TSIREX Posted September 10, 2015 Author Report Share Posted September 10, 2015 That's with rebuild too. Link to comment Share on other sites More sharing options...
hippynerd Posted September 11, 2015 Report Share Posted September 11, 2015 It took me all day, but I ground my td05 to td05h, and now lots of cartridges will fit. I have another, I should have it machined to td06 Link to comment Share on other sites More sharing options...
TSIREX Posted September 12, 2015 Author Report Share Posted September 12, 2015 Did you use a micrometer? Link to comment Share on other sites More sharing options...
TSIREX Posted September 12, 2015 Author Report Share Posted September 12, 2015 It seems like there are more TD05h parts available than the TD05. Link to comment Share on other sites More sharing options...
hippynerd Posted September 12, 2015 Report Share Posted September 12, 2015 Heh, no, i used a drill, many grinding bits, and a fetl tip marker.I marked the housing where the parts mate with felt tip pen.Fit parts and scratch a little ink, and grind away where parts touch.Then I mark it up again with the pen where Ive ground it.I repeated the process about 100 times, it took all day. Link to comment Share on other sites More sharing options...
TSIREX Posted September 15, 2015 Author Report Share Posted September 15, 2015 Dang Link to comment Share on other sites More sharing options...
D-VO Posted September 15, 2015 Report Share Posted September 15, 2015 Heh, no, i used a drill, many grinding bits, and a fetl tip marker.I marked the housing where the parts mate with felt tip pen.Fit parts and scratch a little ink, and grind away where parts touch.Then I mark it up again with the pen where Ive ground it.I repeated the process about 100 times, it took all day. Backyard precision. I lack the patience for something like that. Link to comment Share on other sites More sharing options...
TSIREX Posted September 17, 2015 Author Report Share Posted September 17, 2015 Me too. Link to comment Share on other sites More sharing options...
Recommended Posts