BC_99 Posted February 3, 2014 Report Share Posted February 3, 2014 (edited) I have some parts left over from doing a few conversions to D2 coilovers for myself and a couple of other members. Im also offering the service of converting your old front struts to D2 coilovers, if you don't weld or have the equipment to do it yourself.Here is the list of parts I have available. All prices are without shipping and Paypal fees. Tokico blue front inserts, one is blown but one still has good compression and rebound. $50 http://i601.photobucket.com/albums/tt93/BC_99/20140203_180604_zps0c003f6c.jpg Empty upper strut housings one set SHPs one set standard. Good for lower spring perches or whatever. $10 each or $30 for all 4 http://i601.photobucket.com/albums/tt93/BC_99/20140203_180713_zpsedc6d873.jpg 3 Sets of front springs in decent condition. 1 set of SHP's $30 1 set of standard $20Standards on left SHPs on Right http://i601.photobucket.com/albums/tt93/BC_99/20140203_180814_zpsb9959e97.jpg Same but closer picture http://i601.photobucket.com/albums/tt93/BC_99/20140203_180821_zps97faae6d.jpg Now for the D2 conversions. I offer a few service options. Note all options require that you ship me the sleeves from YOUR D2 Kit to me to fit up and weld. 1: I supply the old core front struts/spindles. I take them apart and cut them to length, I bead blast them and fit the D2 sleeves to the spindles and weld them up and send them back to you ready for paint or powder coating. $250 2: You send me your old front struts/spindles and I provide all of the same services as option 1. $200 3: You disassemble your old front struts and clean them and send them to me and I just do all of the cutting and fitting and welding and send them back. $175 4: You disassemble, clean, cut down, fit, and ship your old struts to me and I just weld them up and send them back. $125 To figure out your shipping costs, I live in Concord, NC 28027. All options can be adjusted to suit your needs, just PM me and we can work it out. Here are some pics of my work on mine. I will only TIG weld these as it is the proper and cleanest way to do this kind of fabrication. http://i601.photobucket.com/albums/tt93/BC_99/20131002_181643_zps66e8a747.jpg http://i601.photobucket.com/albums/tt93/BC_99/20131002_181654_zpsb56004a2.jpg http://i601.photobucket.com/albums/tt93/BC_99/20131002_181708_zpsa00c77c4.jpg http://i601.photobucket.com/albums/tt93/BC_99/20131002_181722_zpsc1c19cf1.jpg http://i601.photobucket.com/albums/tt93/BC_99/20131002_181734_zps26d6f45b.jpg BC_99 Edited February 10, 2014 by BC_99 1 Quote Link to comment Share on other sites More sharing options...
BuGG Posted February 4, 2014 Report Share Posted February 4, 2014 Pmed. Quote Link to comment Share on other sites More sharing options...
Tman Posted February 4, 2014 Report Share Posted February 4, 2014 I will pay too have conversion done if your supplying the struts BRITT lolol Quote Link to comment Share on other sites More sharing options...
87redcat Posted February 4, 2014 Report Share Posted February 4, 2014 Nice welds! Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 4, 2014 Author Report Share Posted February 4, 2014 I will pay too have conversion done if your supplying the struts BRITT lolol I can supply the empty strut housings and spindles. I have one set left anyway. You get the D2 kit and send me the sleeves and I'll do the rest, smart guy. Nice welds! Thanks buddy, I'm trying to offer better than average results, for an affordable price, to make sure the guys who spend the money on D2's get a quality job when it comes to the fabrication part of it. BC_99 Quote Link to comment Share on other sites More sharing options...
Tman Posted February 4, 2014 Report Share Posted February 4, 2014 I think your missing the whole point my friend Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 5, 2014 Author Report Share Posted February 5, 2014 I think your missing the whole point my friend I got the point bud, hence the "smart guy" at the end of my reply. Sale pending on aftermarket springs and all 4 upper spring perches. BC_99 1 Quote Link to comment Share on other sites More sharing options...
mig8788 Posted February 7, 2014 Report Share Posted February 7, 2014 After working with Britt I can say that he is a great fabricator. These are welded the proper way from someone that tig welds daily. They look very clean. Good luck with your sale. Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 7, 2014 Author Report Share Posted February 7, 2014 Thanks Matt, hope yours is coming along. Tell Sammy hey for me and I hope that things on the "family growth" front are coming along well. By the way Zak has one on the way now. BC_99 Quote Link to comment Share on other sites More sharing options...
RonnieJ Posted February 7, 2014 Report Share Posted February 7, 2014 (edited) DIMES! Free bump Edited February 7, 2014 by RonnieJ Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 7, 2014 Author Report Share Posted February 7, 2014 DIMES! Free bump Lol, Thank you, that means a lot after seeing the beautiful welds you guys are laying down on your manis and DPs. BC_99 Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 7, 2014 Author Report Share Posted February 7, 2014 Ok folks, update on first post with parts that are sold deleted and my last set of front struts have been spoken for, so if you want me to do the conversion for you, I need some empty front strut housings and spindles with your sleeves or a source to get more fronts. BC_99 Quote Link to comment Share on other sites More sharing options...
KIDMEN Posted February 9, 2014 Report Share Posted February 9, 2014 Britt did mine they came out awesome. thanks again Quote Link to comment Share on other sites More sharing options...
slowquest Posted February 10, 2014 Report Share Posted February 10, 2014 Britt, does the D2 service include you cleaning up the spindles as shown? And how about a zip code to figure out shipping the stuff to you? Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 10, 2014 Author Report Share Posted February 10, 2014 Britt, does the D2 service include you cleaning up the spindles as shown? And how about a zip code to figure out shipping the stuff to you? Yes, with any of the options listed, I will bead blast the spindles prior to welding. I prefer that they be degreased before they are shipped, but I will clean and disassemble them myself in options 1 or 2. Great point on the zip code. Thank you. It's Concord, NC 28027. I will update the first post with that information also. BC_99 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.