obsolete Posted January 1, 2014 Report Share Posted January 1, 2014 (edited) Keep checking this thread, as I will continue to post new items as I organize and take pictures of them. I charge actual USPS shipping from 55901, ask me for a quote. Anything that says free with purchase can be thrown in with any order that includes at least one item with a price on it. Only one free item per order, please. Feel free to make offers on anything. I will do package deals. My feedback thread is here. Update: Wow, what a response! I've moved unclaimed items up to the top of the list. Everything with a strikethrough has been claimed by someone either in this thread or via PM. Items that have been paid for are removed from the list. Steering center link complete with idler arm, tie rods, tie rod ends, and ball joints. Everything is in good shape, and all the grease boots are intact, including the ones on the center link. I was told this was "low mileage" when I bought it, but I don't really know. The ball joints on the center link have a little play in them, but if the steering on your car is getting really loose, this will probably be an upgrade for you. $75http://i.imgur.com/GzRWT0c.jpg ISC & MPS. Clean, tested good. $60http://i.imgur.com/AKaBZff.jpg | http://i.imgur.com/OJXnXSW.jpg | http://i.imgur.com/Bsc9FiR.jpg Good sweep-tested TPS. $50http://i.imgur.com/TPdpC5y.jpg | http://i.imgur.com/u2XHNmo.jpg | http://i.imgur.com/3jJQQOG.jpg 3G MAF with 4" cone filter adapter and K&N filter. MAF is a "501" that's had the restrictor removed to flow like an Evo MAF. The smaller 3G fits a lot easier in the engine bay than the bulky 2G and is a lot easier to find couplers for because it's round instead of oval. Filter is pre-oiled and ready to go. You will need a MAF-T Gen2 or other piggyback to tune for this. $45http://i.imgur.com/05WD4ST.jpg | http://i.imgur.com/hBrbGIk.jpg Instrument cluster with 104k miles. Trip odometer reset button is not broken! Something got onto the lens, not sure what it is. Windex doesn't do much to it, I haven't tried anything stronger. If I was going to use it I'd try a headlamp polishing kit or just swap lenses. $40http://i.imgur.com/rSNVYqf.jpg | http://i.imgur.com/jB3JtQs.jpg | http://i.imgur.com/EHAX7JW.jpg Driver's side Conquest tail light. Decent condition for a driver/non-show car. A few small cracks around the reverse light. $20http://i.imgur.com/e7BhbIx.jpg | http://i.imgur.com/m6Se8Mi.jpg | http://i.imgur.com/EGFybff.jpg | http://i.imgur.com/pOvFbCa.jpg Steel coolant pipe. This is the one that runs behind the block and along the passenger's side. These rust out over the years and start to leak, this one is solid. $20http://i.imgur.com/LDZPidX.jpg | http://i.imgur.com/cJ2JvOo.jpg Aftermarket fuel filter setup with rebuilt stock fuel lines. Uses a standard 5/16" hose barb fuel filter which is easy to find in any parts store and eliminates the restriction of the stock banjo bolts. Have you seen how tiny the orifices in those things are? All your fuel has to flow through those tiny holes! Uses stock fittings on both ends, rebuilt with Oetiker clamps and brand new Gates fuel injection hose rated for E85 use. $20http://i.imgur.com/CekLRKO.jpg | http://i.imgur.com/mra99ca.jpg | http://i.imgur.com/oW9qeGx.jpg K&N drop-in filter for stock air can. Previous owner didn't oil it, so it didn't pick up much dirt...should be really easy to clean. $15http://i.imgur.com/1v6Uhkr.jpg | http://i.imgur.com/uHV4DtN.jpg Starter motor. Works great. Remanufactured by "World Class" in Japan, not sure how long ago. $10http://i.imgur.com/uDdJ4xN.jpg | http://i.imgur.com/WN1wKoA.jpg Primary 87-89 black fuel injector. Plastic ring at the top is cracked, does not affect performance. Works well. $10http://i.imgur.com/WxwFY14.jpg | http://i.imgur.com/S8aWsTG.jpg | http://i.imgur.com/2aaIS9e.jpg | http://i.imgur.com/9aUuodI.jpg Packard/United Ignition plug wire set. These are at least as good as the wires that Technology made 500HP on! $10http://i.imgur.com/CEjrpkW.jpg | http://i.imgur.com/vwz7RD1.jpg Custom coolant overflow bottle from '99 Mirage. Mounting bracket welded onto intercooler pipe, painted gloss black. This fits if you have an aftermarket intake and emissions deleted. Occupies only a tiny amount of engine bay space, and frees up the space the old overflow bottle used to take up. I was so happy when I came up with this, I hope somebody can use it. $10http://i.imgur.com/T7g7lCw.jpg | http://i.imgur.com/7CAs2JY.jpg | http://i.imgur.com/7RGhc9k.jpg | http://i.imgur.com/VTwfpoH.jpg Battery tray. Was cleaned and painted with POR-15, but I used it for a while and the battery rubbed some of the paint off. Still in nice shape. $5http://i.imgur.com/6aekGXr.jpg | http://i.imgur.com/2H1ZT3m.jpg Brake booster vacuum hose tee/check valve. free with purchasehttp://i.imgur.com/wMUsNVi.jpg Knock sensor. Looks like it was opened up and modified? Not sure what's up with that, but car ran great with it. free with purchasehttp://i.imgur.com/qs2yXxL.jpg | http://i.imgur.com/UkElnXa.jpg Intercooler coupler elbow made from spare radiator hose. It ain't fancy, but it beats your hard-as-a-rock 25-year-old OEM rubber. free with purchasehttp://i.imgur.com/cgYmFma.jpg | http://i.imgur.com/2xifbbn.jpg Stock oil separator. Clean inside. Dented a bit? Not sure if it's supposed to be like that or not. free with purchasehttp://i.imgur.com/HixpkiH.jpg | http://i.imgur.com/M6NEBOI.jpg | http://i.imgur.com/wmlWnN3.jpg Stock turbo coolant line. free with purchasehttp://i.imgur.com/3243waK.jpg | http://i.imgur.com/IAWWUF9.jpg Stock air can, if someone wants one for some reason. free with purchasehttp://i.imgur.com/VlUjTII.jpg | http://i.imgur.com/OfXo3TQ.jpg Edited February 26, 2014 by obsolete Quote Link to comment Share on other sites More sharing options...
natallica Posted January 1, 2014 Report Share Posted January 1, 2014 I'll take the following items: NOS TS63 coolant temperature sender/sensor. $1Full set of brake lines from RockAuto wholesaler closeout. $10Rebuilt power steering pump w/ 6AN fitting. $40ABS delete hose, braided stainless steel. Aeroquip hose with Fragola fittings. $30Raybestos inner and outer axle boot kits. $15 and for the free itemBeck-Arnley 201-833 coolant temperature sender/sensor. Installed once to test. free with purchase ...at least on this list, till you put more up! Thanx-N8 Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 1, 2014 Author Report Share Posted January 1, 2014 Thanks N8! Sent you a PM. Quote Link to comment Share on other sites More sharing options...
mr-starion Posted January 1, 2014 Report Share Posted January 1, 2014 Hella h3 fog bulbs with free 87 starion radio:) Quote Link to comment Share on other sites More sharing options...
87redcat Posted January 1, 2014 Report Share Posted January 1, 2014 man you guys beat me to all the good stuff... Quote Link to comment Share on other sites More sharing options...
87redcat Posted January 1, 2014 Report Share Posted January 1, 2014 I'll take theNOS Borg-Warner clutch throw out bearing ...10NOS Stant Thermostat... ... 2Doorman brake line clips... ... 1NOS Bendix wheel studs... ... 1 And throw in the free center trim piece w/mirror switch ThanksDave Quote Link to comment Share on other sites More sharing options...
dukaine Posted January 1, 2014 Report Share Posted January 1, 2014 (edited) Looks like the place i was at last weekend getting motor radiator and trans with turbo in my quest. If so i did get to see what he had and everything looked quality and legit. Steering pump that was rebuilt looked like new the radio looked decient other then no plugs like he mentioned. Nothing he had looked like junk and everything seemed well priced and worth buying. So GLWS PS wish i knew about the temp sensors when i was there i would have bought those lol Edited January 1, 2014 by dukaine Quote Link to comment Share on other sites More sharing options...
dukaine Posted January 1, 2014 Report Share Posted January 1, 2014 (edited) ill take the 2g setup for 15 bucks i should had just bought it there and dam it was cold that day. BTW I took the weight out of the back of the quest to go get these items for room and it turned out to be a snow storm and dam that was a wicked ride but I made it with only going sideways on the interstate about 5 times lol fun times I do need both the wheel studs and the temp sensor dam i wish i would have seen that earlier Edited January 1, 2014 by dukaine Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 1, 2014 Author Report Share Posted January 1, 2014 Thanks guys, working on boxing stuff up and sending out shipping quotes. Hey Ben, good to see you posting here, thanks for the kind words. That was a ballsy trip you made with your 'quest! Summer tires on SHP rims in the snow! I moved the big pile of parts from the garage to the middle of the kitchen floor to motivate me to finally take pictures of everything and sell it all off. More good stuff coming soon. Quote Link to comment Share on other sites More sharing options...
dukaine Posted January 1, 2014 Report Share Posted January 1, 2014 yea it wasnt so bad on the way back with the weight in the back Quote Link to comment Share on other sites More sharing options...
tsienvy Posted January 1, 2014 Report Share Posted January 1, 2014 (edited) Since I don't any of your other parts, how much just for the 87 stereo? Looks pretty clean. Can you do paypal ?? Edited January 1, 2014 by tsienvy Quote Link to comment Share on other sites More sharing options...
BuGG Posted January 1, 2014 Report Share Posted January 1, 2014 Pmed Quote Link to comment Share on other sites More sharing options...
prototype78 Posted January 1, 2014 Report Share Posted January 1, 2014 Pmed you about driveshaft and 87 maf Quote Link to comment Share on other sites More sharing options...
PDodson Posted January 1, 2014 Report Share Posted January 1, 2014 whats the weight of that power steering box? how much shipped to 70726 Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 2, 2014 Author Report Share Posted January 2, 2014 Thread updated. I think I've replied to everyone's PMs and posts, but let me know if I missed anything. Since I don't any of your other parts, how much just for the 87 stereo? Looks pretty clean. Can you do paypal ??Sorry, I know you were looking for one, but mr-starion beat you to it. Quote Link to comment Share on other sites More sharing options...
87redcat Posted January 2, 2014 Report Share Posted January 2, 2014 PM sent Quote Link to comment Share on other sites More sharing options...
87quest-TSI Posted January 2, 2014 Report Share Posted January 2, 2014 I'll take the '87-'89 water pump, very clean. let me know what shipping to 35805 will be. Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 2, 2014 Author Report Share Posted January 2, 2014 I'll take the '87-'89 water pump, very clean. let me know what shipping to 35805 will be.Thanks, I'll put it in a box when I get home and send you a total. Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 3, 2014 Author Report Share Posted January 3, 2014 87quest-TSI, it says you can't receive any new messages. Quote Link to comment Share on other sites More sharing options...
87quest-TSI Posted January 3, 2014 Report Share Posted January 3, 2014 87quest-TSI, it says you can't receive any new messages.Sorry about that. Should work now. Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 4, 2014 Author Report Share Posted January 4, 2014 Thanks, PM sent. Quote Link to comment Share on other sites More sharing options...
BuGG Posted January 5, 2014 Report Share Posted January 5, 2014 Pmed. Quote Link to comment Share on other sites More sharing options...
mr-starion Posted January 5, 2014 Report Share Posted January 5, 2014 Pmed Quote Link to comment Share on other sites More sharing options...
obsolete Posted January 5, 2014 Author Report Share Posted January 5, 2014 All right, I think I'm all caught up on PMs. Thanks guys. Quote Link to comment Share on other sites More sharing options...
Paper Bag Posted January 6, 2014 Report Share Posted January 6, 2014 PM sent Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.